00195642-01_IM-SetupCenter-3.0_EN.pdf - 第66页
Installation Steps to perform after Installation SIPLACE Setup Center Database and Windows XP SP2 66 Installation Manual SIPLACE Setup Center V3.0 6.4 S teps to perform af ter Installation 6.4.1 SIPLACE Setup Center Dat …
Installation
Setup Center Software Installation
Installation Manual SIPLACE Setup Center V3.0
65
Step 9 Finishing the installation
X Click Finish to end the installation.
Installation
Steps to perform after Installation SIPLACE Setup Center Database and Windows XP SP2
66 Installation Manual SIPLACE Setup Center V3.0
6.4 Steps to perform after Installation
6.4.1 SIPLACE Setup Center Database and Windows XP SP2
When installing Windows XP Service Pack 2 (SP2), the Windows Firewall, formerly ICF (Internet
Connection Firewall), is enabled by default. The default configuration in SP2 blocks incoming traffic for
the most TCP ports.
If you are running the SIPLACE Setup Center GUI on a Windows XP SP2 host and the SIPLACE Setup
Center database on another host, you have to open the port 1433 and 1434 for the database connection.
Furthermore, you have to open the port 445, because blocking will cause errors when using mans MMC
snap-ins like Event Viewer, Local Users & Groups, Services, Computer Management, Disk
Management, Device Manager, Group Policy, and others.
Please refer to Windows help to get further information how to open TCP ports.
6.4.2 Settings in the station software
In order to use Setup Center you should make settings in the station software. For detailed information,
please refer to SIPLACE Setup Center 3.0 User Guide (item no. 00195647-xx).
6.4.3 DATALOGIC Scanner Configuration
6.4.3.1 Verify the firmware status for the PowerScan scanner
For the PowerScan® M8300-D (Dragon M131) scanner it is necessary to verifiy the firmware version
before the setup.
Key:
1. Line: Firmware version
2. Line: Release Date of firmware
3. Line: Address of the Scanner
4. Line: Address of the cradle
NOTE:
Please verify whether the Firmware 1.1.0-00_b00 is displayed on the Dragon Scanner. If not,
you should upgrade the firmware version for the Dragon scanner.
Installation
DATALOGIC Scanner Configuration Steps to perform after Installation
Installation Manual SIPLACE Setup Center V3.0
67
6.4.3.2 Firmware Upgrade of PowerScan Scanner
Installation of Datalogic Aladdin
In order to update a firmware version on a scanner the software "Datalogic Aladdin" need to be installed
on the computer, which is physically connected to the Datalogic OM30X0 cradle.
X Start the installation from the Support Media DVD under:
"\Updates\Firmware\aladdin_setup_1.1.0.0.0_070704.1414_jre.exe".
X Click on Next to continue.
X The installation routine continues if you click on the "I Agree" button to accept the license agreement.