00195642-01_IM-SetupCenter-3.0_EN.pdf - 第69页

Installation DATALOGIC Scanner Configuration Steps to perform after Installation Installation Manual SIPLACE Setup Center V3.0 69 X Select " device autodetection " to find out at wh ich COM port the Datalogic O…

Installation

Steps to perform after Installation DATALOGIC Scanner Configuration

68 Installation Manual SIPLACE Setup Center V3.0

X Choose the destination folder in which the software should be installed.

X Please wait until all files were installed. If the installation is completed, click on Next to continue.

X Click on Finish.

X If the option "Run Datalogic Aladdin" was activated, the application starts now automatically.

Firmware upgrade

After "Datalogic Aladdin" was started, the following overview will be displayed.

NOTE:

Please make sure that no applications such as SIPLACE Setup Center are accessing the serial

communication.

X Exit these applications before you continue.

Installation

DATALOGIC Scanner Configuration Steps to perform after Installation

Installation Manual SIPLACE Setup Center V3.0

X Select "device autodetection" to find out at which COM port the Datalogic OM30X0 cradle is

connected.

X Select "Search for one device" to start the search.

X The cradle is now detected.

Installation

Steps to perform after Installation DATALOGIC Scanner Configuration

70 Installation Manual SIPLACE Setup Center V3.0

X Select "firmware upgrade" from the menu "Tools".

X Select "load firmware file" in the dialog box.

X Open the folder where the firmware version 1.1.0-00_ b00 for the Datalogic Dragon M131 is stored

(standard path "C:\Program Files\Datalogic\Aladdin\resource\ConfigRepository\DRAGON

M131_1.1.0 00_ b00").