OM-1455-004_w.pdf - 第40页

1-9 Tg1576-ID-SO 3. Handling of Single-transfer T ray Feeder Notice Before installing a single-transfer tray feeder on the bank feeder change cart, note the following. · Lock the caster brakes (2 places) of the bank feed…

1-8

Tg1576-ID-SO

0709-003

2.3 Outline for the Installation

Remove the feeder package replacement cart from the GXH main machine

and set the single-transfer tray feeder on the feeder base.

When the single-transfer trays are to be installed, the feeder connector

connection Nos. are as follows:

•

Stage 1 :

103 (105 and 107 connectors are used simultaneously)

•

Stage 2 : 213 (215 and 217 connectors are used simultaneously)

•

Stage 3 : 313 (315 and 317 connectors are used simultaneously)

•

Stage 4 : 403 (405 and 407 connectors are used simultaneously)

Max. 5 tape feeders can be set on the feeder base where the single-transfer

tray has been installed.

The tape feeder settable lanes are as follows:

•

Stage 1 :

141 to 150

•

Stage 2 : 201 to 210

•

Stage 3 : 301 to 310

•

Stage 4 : 441 to 450

CAUTION

If you insert your nger or hand into the gap between the main

machine and the cart, created when the cart is installed, you

might get injured due to the movable part.

Take the greatest care not to insert your hand or nger into the

machine while you operate the main machine.

If you insert your nger or hand into the opening left while the

tape feeder has not been installed, you might get injured due to

the movable part.

Take the greatest care not to insert your hand or nger into the

machine while you operate the main machine.

When the tape feeder is replenished, take care not to hit your

head on the single-transfer tray feeder, which might injure your

head.

1-9

Tg1576-ID-SO

3. Handling of Single-transfer Tray Feeder

Notice

Before installing a single-transfer tray feeder on the bank feeder

change cart, note the following.

· Lock the caster brakes (2 places) of the bank feeder change cart.

· If the

single-transfer tray feeder is seated aoat, vacuum

nozzles or the machine (GXH series) will be damaged, causing

pickup errors.

Be sure to install the single-transfer tray feeder correctly.

CAUTION

Be sure to hold the handle to move the bank feeder change cart.

While attaching the handle slides, be sure to prevent your

ngers from getting jammed.

Be careful not to hit your foot against the cart while moving the

bank feeder change cart.

Try to wear a pair of shoes that can protect your toes and have

slip- and puncture-resistance soles (thickness: 10 mm or more)

while working.

0708-002

1-10

Tg1576-ID-SO

3.1 Installation Procedure for Single-transfer Tray Feeder

CAUTION

When the single-transfer tray feeder is set to or removed from the

cart, or the tray feeder itself is moved, two persons should hold

the specied handle and take the greatest care not to drop it onto

anybody's foot.

Notice

(a) If the single-transfer tray feeder is seated aoat, the

machine (GXH series) may be damaged or pickup errors

will be caused.

Be sure to install the unit correctly on the feeder base.

(b) Remove the single-transfer tray feeder not to be used and

put it on the dedicated temporary holding stand.

Procedure

(1) Before installing a single-transfer tray feeder, conrm that no foreign

substances (dirt or dust) are found on the feeder base located on the

upper area of the cart.

(2) Hold the specied handle by two persons. Then, set the tray feeder on

the location specied for the Fdr. No.

Notice

Do not select a wrong feeder No. position. Otherwise, some

components may be trapped in the drum (rotational disk) area.

(3) Hold the specied handle and insert the front end of the single-transfer

tray feeder so that it is set on the feeder base rails. After that, press it

forward to conrm that it has been securely set.

Notice

Be sure to install the single-transfer tray feeder securely on the

rails of the feeder base.

(4) Hold the handle and insert it from the front slowly and securely. At that

time, make sure that the connector for the single-transfer tray feeder has

been connected securely.

(5) Attach the valve (option) for air supply.

Fig. A1

0708-002