OM-1455-004_w.pdf - 第43页

1-12 Tg1576-ID-SO 071 1-004 4. Name of Each Section and Handling 4. Name of Each Section and Handling This unit consists of the single-transfer tray feeder (including xed pallet), tray xing magnet and magnet attachment…

1-11

Tg1576-ID-SO

3.2 Uninstallation Procedure for Single-transfer Tray

Feeder

CAUTION

Do not drop any single-transfer tray feeder during the attachment or

detachment. Otherwise, a foot injury will result or some feeders may be

damaged.

Carefully handle each unit one by one and do not drop any.

Procedure

(1) Remove the feeder package replacement cart from the main machine

and lock the caster brake (two locations).

(2) Remove the valve (option) for air supply.

Pull out while pushing it in

Fixed Valve Section

Fig. A2

(3) Slowly bring forward the single-transfer tray feeder.

0708-002

1-12

Tg1576-ID-SO

0711-004

4. Name of Each Section and Handling

This unit consists of the single-transfer tray feeder (including xed pallet),

tray xing magnet and magnet attachment.

WARNING

Never modify the system to undo the interlock. It disables the

interlock function and might cause an injury.

CAUTION

When the cover is to be opened or closed, open or close it slowly

with the handle held securely.

Take care so that your nger is not caught.

When the cover is to be opened or closed, open or close it to the

end to obtain the damper effect. When the cover is not opened

or closed to the end, the damper effect is not obtained and

moreover, your hand or nger might be caught by the cover,

Cove

Fig. A3 Single Tray Feeder (Front Side of Machine)

Fixing Pallet (MP-G100)

Tray Fixing Magnet

(MF-G100)

Fig. A4 Fixing Pallet and Tray Fixing Magnet

1-13

Tg1576-ID-SO

0709-003

4.1 Single Tray Feeder

This mechanism is used for moving the pallet to the pick-up position.

This mechanism moves the pallet and transfers it to the component pick-

up position. Then, after the component pick-up, it houses the pallet at the

component replenishment position.

[TRAY READY] Switch

Fig. A5

[Traverse]

• This cylinder mechanism is used for transferring the pa

llet to the mponent

pick-up position. Using the cylinder forward and backward movement,

the pallet xed onto the cylinder is moved between the component pick-

up position (forward limit) and tray supply position (backward limit).

[TRAY READY]

• The tray supply door is opened or closed.

The LED shows the following conditions.

LED ON

: The door is locked.

LED OFF

: The door locking is cancelled.