OM-1455-004_w.pdf - 第70页

3-5 Tg1576-ID-SO 2. Pattern Program 2.1 Description of Pattern Program 2.1.1 Placement Feeder Location Data The "T ray" and "T ray Step" tabs in each "Feeder Base #" tab can be used to set t…

100%1 / 97
3-4
Tg1576-ID-SO
1.3 Outline of System Setting
1.3.1 Composition of System Setting
The system setting for the single tray feeder is composed of the following
data.
Note
The shadowed (gray) items are related to the single tray feeder.
System Setting
Offset Data
Machine System Auto Operation
CongurationSetup
Placement Head/Nozzle Data
Nozzle Data
Nozzle Type Data
Display
Password
Data & Time
Network Data
Monitor Adjustment
Fig. C3 Composition of System Setting
0707-001
1.3 Outline of System Setting
3-5
Tg1576-ID-SO
2. Pattern Program
2.1 Description of Pattern Program
2.1.1 Placement Feeder Location Data
The "Tray" and "Tray Step" tabs in each "Feeder Base #" tab can be used to
set the placement feeder location data for the single tray feeder.
Note
In this Instruction Manual, the condition example is described where the
single
tray feeder has been attached to the feeder base No. 3.
Front Side of Machine
Rear Side of Machine
Feeder Base #1
Feeder Base #2
Feeder Base #3
(Single Tray Feeder)
Feeder Base #4
Fig. C4
0711-003
2. Pattern Program
3-6
Tg1576-ID-SO
(C01) Feeder Bases #1, #2, #3, #4, and Work Area
Fig. C5 "Feeder Base #3" Edit Window
It can be determined which components must be used and which feeder
base (Fdr No.) must be loaded with the selected components.
The tape feeders can be installed on the feeder bases.
Front Side of Machine
Rear Side of Machine
Feeder Base #1
101 to 150 301 to 350
201 to 250 401 to 450
Feeder Base #2
Feeder Base #3
Feeder Base #4
Fig. C6 Positional Relation between Feeder Bases
Work Area
The work area is the place where the data is stored temporarily.
This area is something like a virtual feeder base in which the data can
be stored temporarily and can be used to temporarily keep the data
overowing after data conversion, pattern program creation, etc.
0711-003
2.1 Description of Pattern Program