OM-1455-004_w.pdf - 第5页
2 Tg1576-ID-SO 0707-001 About the Instruction Manual Instruction Manual of Main Machine (GXH Series) This describes the checking items, the safety precautions, the operation procedures, the creation of a component librar…
1
Tg1576-ID-SO
0707-001
Before Use
We are grateful to you for purchasing our single tray feeder for the Hitachi direct-drive
modular mounter (Chip Mounter).
This product is used to load the component placement machine (GXH series) with tray
components.
This instruction manual describes the functions, handling, and operations of the single
tray feeder for those who have nished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading this instruction manual, be sure to keep it at hand for your quick reference.
2
Tg1576-ID-SO
0707-001
About the Instruction Manual
Instruction Manual of Main Machine (GXH Series)
This describes the checking items, the safety precautions, the operation procedures,
the creation of a component library, the maintenance, the troubleshooting, etc., for
those who use the main machine and the electrical circuit diagrams, etc., for those
who are in charge of maintenance work.
Please read this instruction manual before operating the single tray feeder.
Instruction Manual of Single Tray Feeder
This instruction manual is classied into several chapters on subjective basis as
follows.
Chapter 1: Scope
This chapter describes the basic usage of the feeder for those who use this
feeder.
Coverage:
"Outline", "Specications", "Functions", "Construction", "Name
of Each Section", "Handling", etc.
Chapter 2: Operation
This chapter describes the general items related to the operations for those
who have learned "Chapter 1: Scope".
Coverage:
"Basic Knowledge" and "Menus for
Automatic and Maintenance
Operations"
Please refer to the instruction manual of the main machine for
the other operation windows.
Chapter 3: Data
V
arious data is explained for the programmer for whom the pattern program is
made.
Coverage:
"Outline of Data" and "Description of Pattern Program",
"Component Library", and "System Setting"
Please refer to the instruction manual of the main machine for
the other data.
3
Tg1576-ID-SO
Chapter 4: Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the feeder
operators.
Coverage:
"Periodic Maintenance".
Chapter 5: Supplement
This provides various kinds of material such as pneumatic and electrical
circuit diagrams for those who are in charge of machine servicing operations.
Coverage:
"Electrical Circuit Diagram".
First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"
(rst part of this manual).
Identifying Icons in Manual
Notice
This icon shows an important precautionary or a regulatory item.
Note
This icon shows the descriptions for correct operations of the machine.
Reference
This icon shows the item to be refered to.
Procedure
This icon shows the operation procedures.
0707-001