AQ-2 spec book LR.pdf - 第16页
General Specifica tions 14 of 44 3. 1.2 Carrier t ape tra ys F igure 10 T able 8 User benefits •L ow cost, flexible solution for prototyping, evaluation, small batch and low volume production • Steady positioning of smal…
13 of 44
General Specifications
3.0 Options
3.1 Component
feeding
3.1.1 Tape Feeding
Feeder Width Pocket Depths Reels Pitches
PA 2657/00 8mm 3.5mm 7” – 13” 2, 4
(default)
PA 2654/06 8mm 12mm 7” – 13” 2, 4 (default)
(default) 8 - 56 pitch support
15” option available
PA 2654/16 12mm 12mm 7” – 13” 2, 4, 8, 12, 16, 20
(default) 24 ~ 56mm pitch
15” option support available
PA 2654/26 16mm 12mm 7” – 13” 2, 4, 8, 12, 16, 20
15.4mm option (default) 24 ~ 56mm pitch
15” option support available
PA 2654/36 24mm 12mm 7” – 13” 2, 4, 8, 12, 16, 20, 24
15.4mm option (default) 24 ~ 56mm pitch
15” option support available
22” option
PA 2654/46 32mm 12mm 7” – 13” 2, 4,8, 12, 16, 20, 24, 28, 32
15.4mm option (default) 36 ~ 56mm pitch
15” option support available
22” option
PA 2654/56 44mm 12mm 7” – 13” 2,4,8,12,16,20,24,
15.4mm option (default) 28,32,36,40,44
15” option 48~56mm pitch
22” option support available
PA 2654/66 56mm 12mm 7” – 13” 2, 4, 8, 12, 16, 20, 24,
15.4mm option (default) 28, 32, 36, 40, 44, 48,
15” option 52, 56
22” option
9466 920 10511 72mm 18mm 7” – 15” 4,8,12,16,20,24,
(default) 28, 32, 36, 40, 44, 48
Table 7
User benefits
•Twin Tape accommodates two 8mm tapes in a single feeder slot, enhancing the
support for family setup and increasing productivity.
• Intelligence eliminates incorrect feeder set-up, provides pre-empty reel warning and
is a basis for tracking and tracing.
• Single handed operation facilitates fast setup
• All-in-one feeder concepts; one feeder supports various reel sizes, pitches and tape
types reduce feeder inventory.
• Accurate component positioning and precise repeatability for maximum pick
performance
• Support from 72mm tapes to component down to 01005 for wide application support
• Supports splicing for uninterrupted production
• Support tapes based on the IEC 60286-3 specifications
Figure 9
General Specifications
14 of 44
3.1.2 Carrier
tape trays
Figure 10
Table 8
User benefits
•Low cost, flexible solution for prototyping, evaluation, small batch and low volume
production
• Steady positioning of small pieces of carrier tape
• Support from 8mm to 200mm tapes
• Support of multiple tapes per lane
Feeder Lanes Tape Max Max Max Tapes
Width Tape Pocket per lane
Support Length Depth
9466 920 10501 8 6 x 8mm 318mm 3.5mm Multiple
2 x 12mm (1 up to 3
common)
9466 920 10591 Variable, 8mm to 324mm 10mm 1
default 200mm Optional: 2
= 4 *
* Note: Lanes can be extended by adding additional Tape Guides 9466 920 10601
General Specifications
15 of 44
User benefits
• Standard top plate support for most used stick components
• Easy replaceable top plates
• Custom top plate support for long term use in operations of non-supported
component ranges or component mixes
• Generic top plate support for support for quick use in operations of non-supported
component ranges or component mix
• Customized top plates available at request
• Occupies 6 feeder slots
Supported component range:
• SO14/16, SOL-IC 16/20/28, SOM-IC 14/16/20
• SOLJ 26, SOLJ32, SOXJ 32, SOXJ 44
• PLCC 18, PLCC 20, PLCC 28/32, PLCC 44,
• PLCC 52, PLCC 68, PLCC 84, PLCC 100
• Generic (max. tube width: 70mm, max. tube height = 6.3mm,
max. tube length = 430mm).
User benefits
• Increase throughput by automatically delivering trays non-stop
• Low cost of ownership
• Efficient operation due to low interaction
• No pallet setup time or pallet teaching
3.1.3 Stick feeding
3.1.4 Tray stackers
Figure 11
Figure 12