AQ-2 spec book LR.pdf - 第23页

General Specifica tions 21 of 44 User benefits • Programming will never become a bottle-neck • Enhances line balancing • Incorporates main principles of lean manufacturing. • Never a bad device on your PCB – no scrap of …

100%1 / 45
General Specifications
20 of 44
User benefits
• Support tubes of most manufacturers
• Easy of use, easy re-load without production interruption
• Auto-load feature upon power up
• Re-configurable to feed other components.
Radial tape feeder
Tape types Radial, according IEC 60286-2
Radial pitch 12.7mm or 15mm
Component storage Reel or AmmoPack
Physical component dimensions Max. Diameter: 12.5mm
Max. Comp. Height: 22mm
Standard grid 2.5mm to 24.5mm
Lead diameter 0.4mm – 0.8mm
Index speed 1.2sec
Cut Straight or 30° angle cut
3.1.7.3 Stacked
tube
feeding
Table 15
Figure 18
General Specifications
21 of 44
User benefits
• Programming will never become a bottle-neck
• Enhances line balancing
• Incorporates main principles of lean manufacturing.
• Never a bad device on your PCB – no scrap of PCB’s
• Fast code changes – faster time to market
Stacked tube feeder
Maximum number of tubes Stack size = 405mm (± max. 30 tubes)
Maximum tube Size (W x L x H) 56mm x 673mm x 48mm
Minimum tube Size (W x L x H) 6.5mm x 445mm x 65mm
Minimum component size 54mm x [N/a] x 6.5mm
(W x L x H)
Minimum component size 5mm x 2mm x 5mm
(W x L x H)
Component index time Typical 1 sec or less (component
length dependent)
Tube exchange time 6 to 9 seconds
3.1.8 Device
programming
feeding
Table 16
Figure 19
Device programming feeder
Device programming NOR-Flash, NAND Flash, M-System’s Disk
on Chip, Micro Controllers
Programming speeds Device size and brand dependent
Programming sockets 2 or 4
Packaging 16, 24 or 32mm tapes
Reel size 13 inch reels
Table 17
3.1.9 Feeder
trolleys
General Specifications
22 of 44
Feeder A-Series Feeder trolley ACM Feeder trolley AQ-2 Feeder bank
TTF 24 slots 25 slots 25 slots
47 components 50 components 50 components
ITF08 24 25 25
ITF12SV 24 25 25
ITF12 17 12 12
ITF16 16 12 12
ITF24 12 12 12
ITF32 9 8 8
ITF44 7 6 6
ITF56 6 6 6
User benefits
• Trolleys facilitates fast production changeover
•Trolleys allow off-line setup and verification
• Self aligning mechanism provides optimal pick reliability
•A-Series feeder trolley can be used on AX-3, AX-5 and AQ-2
•Feeder bank facilitates a large variety of OEM feeder types on AQ only
Figure 20
Table 18