AQ-2 spec book LR.pdf - 第24页
3. 1.9 Feeder trolleys General Specifica tions 22 of 44 Feeder A-Series Feeder trolley ACM Feeder trolley AQ-2 Feeder bank TTF 24 slots 25 slots 25 slots 47 co mponents 50 components 50 components ITF08 24 25 25 ITF12S V…
General Specifications
21 of 44
User benefits
• Programming will never become a bottle-neck
• Enhances line balancing
• Incorporates main principles of lean manufacturing.
• Never a bad device on your PCB – no scrap of PCB’s
• Fast code changes – faster time to market
Stacked tube feeder
Maximum number of tubes Stack size = 405mm (± max. 30 tubes)
Maximum tube Size (W x L x H) 56mm x 673mm x 48mm
Minimum tube Size (W x L x H) 6.5mm x 445mm x 65mm
Minimum component size 54mm x [N/a] x 6.5mm
(W x L x H)
Minimum component size 5mm x 2mm x 5mm
(W x L x H)
Component index time Typical 1 sec or less (component
length dependent)
Tube exchange time 6 to 9 seconds
3.1.8 Device
programming
feeding
Table 16
Figure 19
Device programming feeder
Device programming NOR-Flash, NAND Flash, M-System’s Disk
on Chip, Micro Controllers
Programming speeds Device size and brand dependent
Programming sockets 2 or 4
Packaging 16, 24 or 32mm tapes
Reel size 13 inch reels
Table 17
3.1.9 Feeder
trolleys
General Specifications
22 of 44
Feeder A-Series Feeder trolley ACM Feeder trolley AQ-2 Feeder bank
TTF 24 slots 25 slots 25 slots
47 components 50 components 50 components
ITF08 24 25 25
ITF12SV 24 25 25
ITF12 17 12 12
ITF16 16 12 12
ITF24 12 12 12
ITF32 9 8 8
ITF44 7 6 6
ITF56 6 6 6
User benefits
• Trolleys facilitates fast production changeover
•Trolleys allow off-line setup and verification
• Self aligning mechanism provides optimal pick reliability
•A-Series feeder trolley can be used on AX-3, AX-5 and AQ-2
•Feeder bank facilitates a large variety of OEM feeder types on AQ only
Figure 20
Table 18
General Specifications
23 of 44
3.1.10 Tray
trolleys
User benefits
• Feeding of any style of tray; up to 94 Jedec trays or 188 other trays
• Allows off-line setup and verification
• Trays can be replenished without stopping the machine
•Two types of tray trolleys available depending on the choice of trolley interface
AQ Tray trolley
Maximum dimensions tray level 327 x 274mm or
338 x 240mm
Numbers of tray levels for trays < 8mm 47
For trays > 8mm and <13mm 23
Maximum load per tray level 0.6 kg
Cycle time for exchanging trays upper level 2.6 secs
lower level 4.0 secs
Figure 21
Table 19