AQ-2 spec book LR.pdf - 第21页

General Specifica tions 19 of 44 3. 1.7 Odd form feeding 3. 1.7 .1 GP AX feeding 3. 1.7 .2 Radial t ape feeding User benefits • Suppor t of most oddform type components • Low friction pockets for easy pick • Operating ef…

100%1 / 45
Direct die feeder
Die size 0.5mm to 10mm
Minimum die thickness 0.05mm minimum thickness
Die delivery rate Flip chip : 3000 die per hour
Wire-bond : 3600 die per hour
Burst mode : 6 die per second
Machine vision Pattern matching, corner
detection, inkt dot and BGA
bump recognition.
General Specifications
18 of 44
Waffle pack feeding 2” x 2” 4” x 4”
Maximum number of waffle packs 50 (45 20
recommended)
Minimum die size (shortest edge length) 1mm 1.27mm
Maximum die size (longest edge length) Limited by Limited by
system system
capabilities capabilities
Slot occupation 6 10
Waffle index time < 3 sec < 4 sec
Approximate manual loading / unloading time ~ 10 sec ~ 10 sec
(per maximum number of waffle packs)
3.1.6.3 Direct die
feeding
User benefits
• Bare die product directly picked from wafer
• Eliminates all taping costs
• Uses threshold and pattern matching to select only qualified die for picking
• Supports flip-chip or wire bond
• Two versions: Shuttle (small and thin bare die products) and Conveyor (thicker and
larger bare die products)
Table 12
Table 13
General Specifications
19 of 44
3.1.7 Odd form
feeding
3.1.7.1 GPAX
feeding
3.1.7.2 Radial tape
feeding
User benefits
• Support of most oddform type components
• Low friction pockets for easy pick
• Operating efficiency through low operator interaction due to high on-board
component capacity
GPAX feeder
Tape specifications EIA-SI/704-2
Tape types Thru-pax, semi-pocket, flatpax
44mm – 200mm
Component locations Single or matrix tape layout.
XY Accuracy on leads: ± 0.05
Table 14
Figure 16
Figure 17
User benefits
• Easy to use and rugged construction
• Support for 12.7mm and 15mm radial tapes
• Support for reels and AmmoPacks
• Slanted cut action possible for enhanced component insertion
General Specifications
20 of 44
User benefits
• Support tubes of most manufacturers
• Easy of use, easy re-load without production interruption
• Auto-load feature upon power up
• Re-configurable to feed other components.
Radial tape feeder
Tape types Radial, according IEC 60286-2
Radial pitch 12.7mm or 15mm
Component storage Reel or AmmoPack
Physical component dimensions Max. Diameter: 12.5mm
Max. Comp. Height: 22mm
Standard grid 2.5mm to 24.5mm
Lead diameter 0.4mm – 0.8mm
Index speed 1.2sec
Cut Straight or 30° angle cut
3.1.7.3 Stacked
tube
feeding
Table 15
Figure 18