00193826-01.pdf - 第132页
6 Component handling User Manual SIPLACE CS 6.2 Technical data f or the feeders Software version SR. 101.xx06/2003 US Edition 132 6.2 T echnical dat a for the feeders The foll owing pages con tain diagram s of al l the f…
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.1 General
131
The feeders are labeled as shown below:
6
WARNING FIRE HAZARD 6
Æ Check and empty the waste tape container every hour.
Æ Only empty the waste tape container into suitable collection containers because of the risk of
fire. These containers must not be set up inside buildings.
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
6 Component handling User Manual SIPLACE CS
6.2 Technical data for the feeders Software version SR.101.xx06/2003 US Edition
132
6.2 Technical data for the feeders
The following pages contain diagrams of all the feeders, technical data and the feeder setting
options on the placement system.
6.2.1 8 mm S II feeder
Fig. 6.2 - 1 8 mm S II feeder
Part no. 00141096-xx
Width 30.6 mm
Tracks per feeder 2
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 10,000
Transport distance (variable) 2 mm / 4 mm
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders
133
6.2.2 3 x 8 mm S feeder
Fig. 6.2 - 2 3 x 8 mm S feeder
Part no. 00141098-xx
Width 30.6 mm
Tracks per feeder 3
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 10,000
Transport distance (variable) 2 mm / 4 mm