00193826-01.pdf - 第135页
User Manual SIPLAC E CS 6 Component han dling Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders 135 6.2.4 12/16 mm S fe eder Fig. 6.2 - 4 12/16 mm S feeder Part no. 00141092-xx Width 30.6 m…
6 Component handling User Manual SIPLACE CS
6.2 Technical data for the feeders Software version SR.101.xx06/2003 US Edition
134
6.2.3 3 x 8 mm S feeder for 0201/0402 components
Fig. 6.2 - 3 3 x 8 mm S feeder for 0201/0402 components
Part no. 00141099-xx
Width 30.6 mm
Component range 0201, 0402
Tracks per feeder 3
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 10,000 to 15.000
Transport distance (variable) 2 mm / 4 mm
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders
135
6.2.4 12/16 mm S feeder
Fig. 6.2 - 4 12/16 mm S feeder
Part no. 00141092-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Transport distance (variable) 4 mm, 8 mm, 12 mm, 16 mm
6 Component handling User Manual SIPLACE CS
6.2 Technical data for the feeders Software version SR.101.xx06/2003 US Edition
136
6.2.5 12 mm S feeder for capacitors based on powdered metal, model C/D
Fig. 6.2 - 5 12 mm S feeder for capacitors based on powdered metal, model C/D
Part no. 00141118-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Maximum tape height 3.6 mm
Transport distance (variable) 4 mm, 8 mm, 12 mm, 16 mm
NOTE: 6
Using this feeder type you can adjust the height of the tape support at the pick-up position. 6
WARNING 6
Use only feeders, labeled as shown above, when
feeding capacitors based on metal-powder
(e.g. tantalum). 6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis