00193826-01.pdf - 第138页
6 Component handling User Manual SIPLACE CS 6.2 Technical data f or the feeders Software version SR. 101.xx06/2003 US Edition 138 6.2.7 24/32 mm S feede r Fig. 6.2 - 7 24/32 m m S feeder Part no. 00141093-xx Width 42.4 m…
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders
137
6.2.6 12 mm S feeder for capacitors based on powdered metal, model E
Fig. 6.2 - 6 12 mm S feeder for capacitors based on powdered metal, model E
Part no. 00141117-xx
Width 30.6 mm
Tracks per feeder 1
Assigned locations 1
Maximum number of feeders 2 x 20
Stock of components for 7" reels approx. 4000
Maximum tape height 3.6 mm
Transport distance (variable) 4 mm, 8 mm, 12 mm, 16 mm
WARNING 6
Use only feeders, labeled as shown above, when feed-
ing capacitors based on metal-powder
(e.g. tantalum). 6
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis
6 Component handling User Manual SIPLACE CS
6.2 Technical data for the feeders Software version SR.101.xx06/2003 US Edition
138
6.2.7 24/32 mm S feeder
Fig. 6.2 - 7 24/32 mm S feeder
Part no. 00141093-xx
Width 42.4 mm
Tracks per feeder 1
Assigned locations 1.5
Maximum number of feeders 2 x 13
Stock of components for 7" reels approx. 2000
Transport distance (variable) 4 to 40 mm, (in 4 mm increments)
User Manual SIPLACE CS 6 Component handling
Software version SR.101.xx 06/2003 US Edition 6.2 Technical data for the feeders
139
6.2.8 Vibratory stick feeder, type 3
Fig. 6.2 - 8 Linear vibratory feeder, type 3
Part no. 00142031-xx 6
Width 28 mm 6
Tracks per feeder 1, 2, 3, or 6 6
Assigned locations 1 6
Maximum number of feeders 2 x 20 6
Stock of components up to 150 per steel stick magazine, 6
depending on the component length 6
Specific data for stick magazines 9.5 mm wide / x 3 6
15 mm wide / x 2 6
> 15 mm wide / x 1 6
30 mm wide / x 1 6
Cycle time (variable) from 400 to more than 1000 msec 6