00197044-02_IM_706_1_DE_EN.pdf - 第30页
Station S oftware 706. 1 / Install ation Man ual Ausgabe 11/2012 E dit ion 30 5.4.2 Language S election Installat ion of t he station s of tware contin ues with the select ion of the langua ge. ► Select th e languag e to…
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
29
Thereafter, the following dialog is displayed.
Figure 5-8: Installing driver software for Sontheim device, part 2
► Perform the same steps as in the previous dialog.
If a Baumer card is installed, the following dialog is displayed.
Figure 5-9: Installing driver software for Baumer card
► Activate the Always trust software from "Baumer Optronic GmbH" field.
► Click the Install, button to install the corresponding driver software.
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
30
5.4.2 Language Selection
Installation of the station software continues with the selection of the language.
► Select the language to be used during installation.
You can choose between German (Germany) and English (United States).
Figure 5-10: Language selection
► Click the OK button.
5.4.3 Installing the System Files
Figure 5-11: Installing the system files
The necessary system files are installed if they are not already on the machine computer. Under
Windows XP the machine computer is rebooted automatically after installation. You are
automatically logged in as administrator. Under Windows 7 no reboot is necessary.
Installation of the station software continues with the welcome screen.
5.4.4 Welcome Screen
Figure 5-12: Welcome screen
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
31
► Click the Next button.
5.4.5 Selecting the Machine Type
Figure 5-13: Selecting the machine type
► Select the option for the machine type for which the software is to be configured.
► Click the Next button.
5.4.6 Selecting the Hardware Configuration
The Hardwareconfiguration dialog box is opened, in which you configure the hardware for one-
computer or two-computer operation. One-computer operation is default for the SX and DX
placement machines.
Figure 5-14: "SIPLACE Setup" dialog box