00197044-02_IM_706_1_DE_EN.pdf - 第35页
Station S oftware 706. 1 / Install ation Man ual Ausgabe 11/2012 E dit ion 35 5.5 Installing SIPLA CE Smart GUI Th e SIPLACE Sm art GU I can optiona lly be i nstalle d after the s tati on soft ware has been i nstalled . …
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
34
5.4.8 Finalizing the Installation
NOTICE
The status only lists the programs that have just been installed. If, for instance, the
current version of SIPLACE Vision was already installed, it is not listed here.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
► If you wish to read the log of the installation of any program, click the Ok (or Error) button next
to the name of the program. The Notepad is started and displays the appropriate file.
Figure 5-17: Finalizing the installation
► Click the Finish button.
CAUTION
► Wait a few seconds after you have clicked the Finish button, before you shut down
and switch off the computer / the machine!
As some installation steps are not performed until the end of the installation by the
InstallShield, the installation might otherwise be incomplete, what may cause
problems during further installations.
► Optionally, you can now install the SIPLACE Smart GUI.
CAUTION
In two-computer operation the Vision computer must also be installed (see chapter 6)
before you shut down the machine computer, as the station will otherwise not boot
correctly due to version conflicts.
In one-computer operation the Vision computer software is automatically installed during
the station software installation.
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
35
5.5 Installing SIPLACE Smart GUI
The SIPLACE Smart GUI can optionally be installed after the station software has been installed. If
the station software has not been installed first, a corresponding error message is displayed.
As of station software version 706.1 the SIPLACE Smart GUI installing program is contained on the
station software installation DVD.
► If necessary, insert the installation DVD in the drive.
It is read in automatically.
NOTICE
If auto start has been disabled for the drive, you must start the installation manually from
the Windows Explorer.
► Open the Explorer and start SmartGUI.exe under drive E: by double clicking it.
The SIPLACE Choice Center dialog box is opened.
Figure 5-18: "SIPLACE Choice Center" dialog box
► Click the Smart GUI for station computer button.
Installation of the SIPLACE Smart GUI continues with the welcome screen.
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
36
5.5.1 Welcome Screen
Figure 5-19: Welcome screen
► Click the Next button.
The necessary files are installed.
5.5.2 Finalizing the Installation
Figure 5-20: Finalizing the installation
► Click the Finish button.