6241f.pdf - 第29页
Page 21 GS-394-02 Sequencer Input Configuration for Each Add-On Module Location of Dispensing Stations by Component Class Station Class I 5.08 mm (0. 200") & 10.1 6mm (0.400") Pitc h Class II 5.08mm (0.2 00…
Page 20 GS-394-02
Technical Specifications
Input Specification
The axial lead components prepared and taped to the requirements
established in GS-061 “Lead Tape Reel Packaging of Axial Lead
Components,” which is an adaptation of EIA standard RS-296-E,
may be processed by the VCD/Sequencer 8. The standard input for
this machine is Class I.
Class II input may be located in only eight designated stations per
add-on module, exclusive of the Jumper Wire option. (See table on
following page.)
Class III input is not recommended for use in this machine.
Input stations are designed to accept reel or ammo pack component
packages.
Page 21GS-394-02
Sequencer Input Configuration for Each Add-On
Module
Location of Dispensing Stations by Component Class
Station
Class I
5.08mm (0.200")
& 10.16mm
(0.400") Pitch
Class II
5.08mm
(0.200")
Pitch*
Notes
1
9
2
9
3
99
Without Jumper Wire
3With Jumper Wire
4
9
5
99
If no Jumper Wire in Station 3
5
99
If Jumper Wire in Station 3
6
9
7
9
8
9
9
9
10
9
11
99
Any Combination
12
9
13
99
Any Combination
14
9
15
99
Any Combination
16
9
17
99
Any Combination
18
9
19
99
Any Combination
20
9
With Jumper Wire:
14 stations for Class I only
5 stations for Class I or II
1 station for Jumper Wire only
Without Jumper Wire:
13 stations for Class I only
5 stations for Class I or II
2 stations for Class I or II
*
10.16mm (0.400") pitch is not recommended.
Page 22 GS-394-02
Dispensing Head Component Input Specifications
Distance Between Tapes
Class I 52.4mm ± 1.5mm (2.063" ± 0.059")
Class II 63.54mm ± 1.5mm (2.50" ± 0.059")
Wire Size and Component Sizes
Standard 5mm
Steel Wire Size
1,3
Minimum 0.38mm 0.38mm
(0.15") (0.015")
Maximum 0.81mm 0.81mm
3
(0.032") (0.032")
Copper Wire Size
1,3
Minimum 0.38mm 0.38mm
(0.15") (0.015")
Maximum 0.81mm 0.81mm
3
(0.032") (0.032")
Component Body Diameter
4
Minimum wire dia. wire dia.
Maximum 8.4mm 8.9mm
(0.330") (0.350")
Minus 2 Minus 2
times board times board
thickness thickness
Component Body Length
6
Minimum 0mm 0mm
(0") (0")
Maximum 15.75mm 15.75mm
(0.620") (0.620")
Standard Input Pitch Distances
5.08mm (0.200") or 10.16mm (0.400")
Tape Width
Standard 6.4mm (0.25")
1. Component lead diameters are for optimum performance using the listed tooling. Consult a Universal Sales Engineer for deviations
from the figures listed.
2. Increased insertion span is possible with reduction in maximum body diameter and board thickness. Consult a Universal Sales
Engineer for optional tooling.
3. When inserting components at 5mm (0.197") and 5.5mm (0.216") insertion spans, maximum lead diameter is 0.61mm (0.024").
4. At 5mm and insertion span, the maximum component body diameter is 2.29mm (0.090").
5. Minimum printed circuit board hole diameter is nominally 0.48mm ± 0.08mm (0.019" ± 0.003") + lead diameter.
6. Body length is dependent on the insertion span. See “Component Body Length Considerations” for additional information.
A
C
F
B
B
E
D