6241f.pdf - 第36页

Page 28 GS-394-02 Component Clearances for Cut and Clinch Anvil Assemblies Side V iew Ax ial l ea de d co mp on en ts to pr e vio us ly in se rte d axi al le ad ed com pone nts . Side V iew Ax ial l ea de d co mp on en t…

100%1 / 54
Page 27GS-394-02
Cut and Clinch Footprint
6.15 (0.242)
3.61 (0.142)
2.11 (0.083)
7.98 (0.314)
3.58 (0.141)
8.13 (0.320)
2.72 (0.107)
6.10 (0.240)
11.51 (0.453)
2.62 (0.103)
Insertion
Center Distance
45°
23°
Dimensions are in millimeters;
inch equivalents are bracketed.
Page 28 GS-394-02
Component Clearances for Cut and
Clinch Anvil Assemblies
Side View
Axial leaded components
to previously inserted
axial leaded components.
Side View
Axial leaded components
to previously inserted
DIP components, with both
outward and inward clinch.
End View
Axial leaded components
to previously inserted
axial leaded and DIP
components shown with both
outward and inward clinch.
A B C
3.68mm 2.54mm 2.54mm
0.125" 0.100" 0.100"
A
B
C
2.54 (0.100)
2.79 (0.110)
2.54 (0.100)
Outward DIP
Inward DIP
Outward DIP
Inward DIP
Continuity Style Lead Sense
Dimensions are in millimeters;
inch equivalents are bracketed.
Page 29GS-394-02
Insertion Specifications
Type VCD (Variable Center Distance)
Hole Span Minimum Maximum
Standard Tooling 7.62mm (0.300") 24.13mm(0.950")
5.0mm Tooling 5.0mm(0.197") 21.59mm(0.850")
Programmable 0.01mm (0.001")
Span Increments
Depth Stops Programmable from 0.2mm to 5.28mm (0.008"
to 0.208") in 0.2mm (0.001") increments.
Board to Tooling 20mm (0.8") maximum with tooling in full up
Clearance position
Cut and Clinch Adjustable from 45° to 90° clinch angle.
Insertion Rate Up to 25,000 insertions per hour with factory test
specifications. Refer to Insertion Rate
Determination section.
Positioning System
Accuracy ±0.05mm (±0.002")
Repeatability ±0.025mm (±0.001")
Table Capacity 22.7 kg (50 lbs) maximum, including
workboard holder
Programming ±0.01mm (metric dimensioning)
Capability ±0.001" (inch dimensioning)
Speed 368mm (14.5") per second
Sequencer Specifications
Input Class I (52mm), standard. Per EIA Standard
RS-296-E and this General Specification. Also,
limited class II. See “Input Specification.”
Dispensing Heads Required, must be ordered separately. Refer to
the Optical Refire Dispensing Head section.
Sequencer Up to 11 sequencer modules in multiples of 20
Modules dispensing stations (220 stations maximum);
two optional jumper wire dispensing heads can
be installed.