Maintenance Schedule保养计划.pdf - 第22页

Vision XP+ V AC / XP+ / XP / XS Page 31 2 Mainte nance 2.7 Clean ing the Exh aust Fi lters at the I nlet and the Outlet Service Instructions V ersion 1.3 2.7 Cleaning the Exha ust Filters at the Inlet and the Outle t Fig…

Page 30 Vision XP+ VAC / XP+ / XP / XS

2 Maintenance

2.6 Vacuum Unit

Service Instructions

Version 1.3

2.6.3 Vacuum pump filter

Fig. 2-33 Filter Vacuum pump

Fig. 2-34 Filter Vacuum pump

Fig. 2-35 Filter Vacuum pump

The filter container in front of the

vacuum pump must be opened from

time to time and the filter cleaned.

Consumbales, tool:

• Cleaning agent

• Cleaning cloth

• Cleaning bath

Procedure

1. The clamping ring of the filter

container must be opened.

The lid can be removed.

2. If the paper filter is dirty, it

must be replaced.

3. Lay the fabric filters in a

suitable cleaning agent for

cleaning.

4. After cleaning, put everything

back together and close the

clamping ring of the filter

container.

Vision XP+ VAC / XP+ / XP / XS Page 31

2 Maintenance

2.7 Cleaning the Exhaust Filters at the Inlet and the

Outlet

Service Instructions

Version 1.3

2.7 Cleaning the Exhaust Filters at the Inlet and the Outlet

Fig. 2-36 Pulling Out the Filter Housing

Fig. 2-37 Lifting the Filter Out of the Housing

Fig. 2-38 Lifting the Filter Housing

Fig. 2-39 Pull out the Filter

Consumable materials, tools:

• Oven cleaner

• Rags

• Or rinsing bath

Procedure:

1. Pull out the filter housing along

with the metallic gauze filter.

2. Loosen the wing screws and lift

the filter out of the filter housing.

3. Set the metallic gauze filter into

a rinsing bath. If a rinsing bath is

not available, the filter can be

cleaned with oven cleaner and

rags.

4. Lift the filter housing and set it

into a rinsing bath as well, or

clean it with oven cleaner and

rags.

5. After cleaning the filter, set it

back into the filter housing and

reinstall it into the system

6. Also pull out the metal gauze

filters located behind the first

hood of the machine and put it

in a rinsing bath.

Page 32 Vision XP+ VAC / XP+ / XP / XS

2 Maintenance

2.8 Water Tank - Checking and Refilling the Water Fill-

Level (Option)

Service Instructions

Version 1.3

2.8 Water Tank - Checking and Refilling the Water Fill-Level

(Option)

Fig. 2-40 Checking the Water Fill-Level

Fig. 2-41 Checking the Water Fill-Level, CN

The water tank is located behind the

second door from the right.

Consumable materials, tools:

• Water

• Antifreeze

Note!

Coolant is mixed using 1 part

antifreeze to 3 parts water.

• Watering can or similar container

Procedure:

1. The front of the water tank is

marked with the designations

MAX. and MIN.

2. When the fill-level drops to the

minimum mark, the tank must

be refilled with coolant to the

maximum mark.

3. For re-filling open the filling port

(D) at the tank and fill in the

mixed cooling liquid.

Cooling system components:

A) Cooling water controller

B) Water leak and minimum water

level sensor

C) Connection for draining water

D) Filling port

E) Temperature watchdogs