M4serviceManual_e.pdf - 第10页

1 Installation 1-2 Installation of Machine Environmental Requirements Install the machine at the place wh ere the below conditions are met. Do not do tasks, su ch as moving the machine or conn ecting the machine with the…

1 Installation

1-1

Installation

1 Installation

1-2

Installation of Machine

Environmental Requirements

Install the machine at the place where the below conditions are met.

Do not do tasks, such as moving the machine or connecting the machine with the main switch ON to

prevent electric shock.

■ Ambient Temperature: Accuracy assurance 23 +/-2 degrees centigrade

Operation assurance 5 to 40 degrees centigrade

(The average over a period of 24 hours does not exceed 35 degrees C.)

■ Relative Humidity: 45 to 60 percent, non-condensing

■ Atmosphere: Dust and corrosive gas free

■ Floor: Floor must be flat and sturdy enough for freedom from vibration during

operation.

■ Power Requirements: 200 VAC +/- 10%, three phase, 50/60 Hz

* 208/220/240/380/400/415/440V VAC with optional power transformer

Power consumption: 1.5kW

Capacity: 4.0kVA

Leakage current: 20mA or less

* Power and ground the machine independently of other machines which may be a

noise source, such as a compressor, welding machine, or reflow soldering machine

with magnetic contacts.

Warning

1 Installation

1-3

How to Hoist the Machine

Be sure to use the bolts when hoisting the machine.

■ Recommended Bolt Size

● Type 1 (M30 x P3.5)

● Type 2 (M30 x P3.5)

Type M×P D d d1 L L2 L3 S T R H B C

1 30×3.5 36 68 -- 131 30 56 48 22 3 16 22 25.6

2 30×3.5 36 68 88 141 40 56 48 22 3 16 22 25.6

[Unit = mm]