M4serviceManual_e.pdf - 第75页
5 Materials 5-1 5 Materials Standard Accessories Nozzl e, Locate Pin, Pushup Pin, etc. Replacem ent Parts Air Circuit Diagram Sy stem Block Diagram Layout of Electrical Parts
4 Electrical Section
4-8
Cautions about overall electrical items
Once rats enter indoors or buildings, they easily get into machines. They may tear wirings and leave
excrement that can cause serious damage to machines.
If rats tear wirings, it may cause short circuits. And it could cause a serious problem to machines.
If rats leave excrement over printed circuits boards or bared cables, it will be carbonized and may cause
fire.
REFERENCE:
Below is an example we had fire from a board. (See the pictures below.)
You can see blue-green attached material on the burnt location.
When copper burns, Cuo (copper oxide II) is black and Cu2O (copper oxide I) is red. According to the
blue-green color, the attached material can be considered Copper hydroxide. By this fact, we suppose water
existed on the burnt location.
Blue-green
attachments
COUNTERMEASURE:
1．Keep the room clean, neat and organized.
2．Lock up the room with no openings.
If once rats came in;
3．Sprinkle rat repellent.
4．Catch rats with adhesive sheets. (Emergency countermeasure)
5．Hire an rat exterminator.
To prevent damage caused by rats, it is important to keep rats-free environment.
If already rats are in your space, exterminate them by using rat repellent or other ways as mentioned above.
5 Materials
5-1
5
Materials
Standard Accessories
Nozzle, Locate Pin, Pushup Pin, etc.
Replacement Parts
Air Circuit Diagram
System Block Diagram
Layout of Electrical Parts
5 Materials
5-2
M4a/M4e/M4s: Standard Accessories
Part Name Part No.
Qty for
M4a/M4s
Qty for
M4e
Remarks
PIN, MAGNET ASSY
LG0-M9820-00X
※ ※
When the magnet clamp
function is provided, 9 pins
are supplied as standard
accessory.
PIN, PUSH UP (Matrix) (See the optional list)
※ ※
When the matrix clamp
function is provided, 8 pins
of each type (six types in
total) or an arbitrary 48 pins
are supplied as standard
accessory.
Selections:
for 0.5mm
thickness, 1.0mm, 1.2m,
1.6mm, or 2.0mm.
HNS. PRE-PROCESS LG0-M56K0-10X (1) (1) Signal
Cable
(Std.)
HNS.POST-PROCESS LG0-M56K0-20X (1) (1)
Signal Cable(SMEMA) LG0-M56K0-00X (2) (2)
Select “Standard” or
“SMEMA” spec..
LCD Monitor
KGT-M5106-01X
1 1 LCD monitor is optional.
Keyboard KW3-M5150-60X 1 1 English keyboard
Mouse KW3-M5169-04X 1 1 Optical Mouse
Conveyor Handle LG0-M90B9-000 1 1
Lens Cleaner Set LG0-M89A4-000 1 1
Needle Wire KV8-M8887-00X 1 1 For nozzle cleaning
Silicone Grease LG0-M89AB-000 1 1
Vacuum Gauge Set LC1-M89A5-00X 1 1
Separator Assy LG0-M3418-011 12 (12~24) In case of M4e/M4s, the
number differs depending on
the Feeder bank specification.
Parameter FD 1 1
Data FD 1 1