SIPLACE D系列Servicemanual.pdf - 第6页
Introduction Safety Instructions Serial Number of D4 Module 6 Servicemanual (internal ve rsion) SIPLACE D Series 1.1.3 Serial Number of D4 Module 1.1.4 Environment ally-Friendly Dis posal of Materials and Components SIPL…
Introduction
Serial Number of D1/D2 Module Safety Instructions
Servicemanual (internal version) SIPLACE D Series
5
1Introduction
1.1 Safety Instructions
1.1.1 Serial Number of D1/D2 Module
1.1.2 Serial Number of D3 Module
DANGER: Nonobservance of these safety instructions may cause injury to personnel and
damage to the machine!
X Please observe the safety instructions in the operating manual of the according machine for
all service work!
The serial number of your placement machine can
be found on the typeplate (1).
The serial number of your placement machine can
be found on the typeplate (1).
Introduction
Safety Instructions Serial Number of D4 Module
6 Servicemanual (internal version) SIPLACE D Series
1.1.3 Serial Number of D4 Module
1.1.4 Environmentally-Friendly Disposal of Materials and Components
SIPLACE products are manufactured using only materials and parts that can be easily separated and
disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the
installation, dismantling or operation of the machine.
1.1.5 Use of Original SIPLACE Accessories and Spare Parts
Only use Siemens AG original spare parts and authorized accessories. The use of other parts will affect
safety and will invalidate the liability for any consequential damage.
The serial number of your placement machine can
be found on the typeplate (1).
NOTE:
The company operating the system has sole responsibility for the proper, environmentally-
friendly disposal of machines, working materials, consumables and wear parts.
X Please observe your national statutory provisions for waste disposal and environmental
protection.
Introduction
Information About This Service Manual (Customer Version) Key Information
Servicemanual (internal version) SIPLACE D Series
7
1.2 Key Information
1.2.1 Information About This Service Manual (Customer Version)
The service work described in this manual may only be performed by specially trained service
technicians, with appropriate qualifications and expertise.
If you should have any questions during the service work, please contact the SIPLACE customer hotline
directly:
(0049) 089 20800 48642
or send an e-mail to: hotline.siplace@siemens.com.
1.2.2 Validity of Document
This document contains instructions about the service work for all machines from the SIPLACE D series.
The service work is listed on a module by module basis:
If the work required for specific machines should differ from the standard procedure, this will be
indicated with reference to the machine number, series and various delivery statuses.
Diagrams should be seen as examples e.g. the diagram of a SIPLACE D3 or machine with different
paint finish does not mean that the following information only applies to the machine type shown.
The main focus of this manual is on a description of mechanical service work.
Please refer to the circuit diagram folder supplied with your machine for any electrical checks.
1.2.3 Release History
1.2.4 Further Information
If you have any questions about this manual or if you would like more information about certain subjects,
please contact your local Siemens branch or us directly:
Siemens AG, Industry Sector
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D81379 Munich
Release Changes
06/2007 New version
07/2008 Corrections