00196624-04_Service Manual WPC5_6_EN_01-2019.pdf - 第126页
Service Manua l WPC5 / WPC6 Page 4-126 4.2.3 Reference Proximity Switch (Bero) ➢ Select the feed axis ( 1). ➢ Select the function Reference bero (2). ➢ Select Next (3). ➢ Follow the instruction sho wn and continue w it…
Service Manual WPC5 / WPC6
Page 4-125
➢ Confirm the new zero point position with
Finish
(1).
Service Manual WPC5 / WPC6
Page 4-126
4.2.3 Reference Proximity Switch (Bero)
➢ Select the feed axis (1).
➢ Select the function
Reference bero
(2).
➢ Select
Next
(3).
➢ Follow the instruction shown and continue with
Commit
(1).
Service Manual WPC5 / WPC6
Page 4-127
➢ Confirm the new reference point proximity switch with
Finish
(1).
Setting the Driver Cam
➢ Loosen the screw (1), fastening the cam to the driver.
➢ Correct the position of the cam by moving it accordingly in either the – or + direction.
➢ Retighten the screw (1) and repeat the measuring steps (see "3.7.5 Replace the Reference
Sensor, Feed Axis [03057837-xx]" [➙ 3-79]).
➢ Repeat the individual steps until no more error messages appear.