00196622-03_OM_WPC5_6_EN.pdf - 第8页

Introduction Module Description 1.2.2 Serial Number of Module 8 Operating Manual SIPLACE WPC5/WPC6 1.2.2 1 . 2 . 2 S e r ia l N u m b e r o f M o d u le Serial Number of Module 1.2.3 1 . 2 . 3 E U D e c la r a t io n o f…

Introduction

1.2.1 General Module Description

Operating Manual SIPLACE WPC5/WPC6 7

1.2.1.2

1.2.1.2 Function

Function

Legend

1. The lifting axis of the waffle pack tray storage unit positions the selected waffle pack tray carrier to

the height of the horizontal feed axis.

2. The feed axis then moves the waffle pack tray carrier to the placement head pickup area.

3. The components are removed.

4. The waffle pack tray carrier is then moved back to the tray storage unit.

The waffle pack trays are defined in the setup with their corresponding components. After converting the

setup, the tray storage unit performs a reference run.

The position of the waffle pack tray carrier in the tray storage unit and the placement contents of the tray

carrier are defined in the setup.

NOTICE

Placement procedure interrupted

If the placement procedure is interrupted and the Wafflepack Changer is switched off, the setup

and current component level details are still kept.

Introduction

Module Description 1.2.2 Serial Number of Module

8 Operating Manual SIPLACE WPC5/WPC6

1.2.2

1.2.2 Serial Number of Module

Serial Number of Module

1.2.3

1.2.3 EU Declaration of Conformity

EU Declaration of Conformity

The product/device described below conforms to the regulations and standards listed in the EU Decla-

ration of Conformity provided.

Manufacturer:

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München, Germany

The serial number of the WPC5/WPC6 can be found on

the typeplate (1).

Model Waffle Pack Changer

Type WPC5

Item No. 00119827- xx

Model Waffle Pack Changer

Type WPC6

Item No. 00119828- xx

Introduction

1.2.4 Correct Usage Module Description

Operating Manual SIPLACE WPC5/WPC6 9

1.2.4

1.2.4 Correct Usage

Correct Usage

The product may only be used for the application described in the catalogues and technical specifica-

tions i.e. for placement of SMD components and only in connection with the third party devices and com-

ponents recommended or approved by SIPLACE.

Any other use is deemed to be incorrect and not as prescribed.

If the product is not used as prescribed, SIPLACE will accept no liability for any damage that may occur

and will not guarantee that the components will work properly and without problems.

Prescribed or correct usage includes the observance of all the instructions in the user manual.

The proper and safe operation of the product requires correct transportation, storage, installation and

assembly, plus careful, accurate utilization and servicing.

1.2.5

1.2.5 Incorrect Usage

Incorrect Usage

Failure to use the product as prescribed can result in both danger to life and limb and material damage.

For this reason any use that is not prescribed is not allowed. If the product is not used as prescribed,

SIPLACE will accept no liability for any damage that may occur and will not guarantee that the compo-

nents will work properly and without problems.

Failure to use the product as prescribed includes, for example:

▪ The use on other machines than those machine types officially approved by SIPLACE for this prod-

uct.

▪ The use of the product in a working environment which deviates from that described in this manual.

▪ Use of the placement machine with the installed product by unqualified personnel.

1.2.6

1.2.6 Noise Emissions

Noise Emissions

1.2.7

1.2.7 Environmentally-Friendly Disposal of Materials and Components

Environmentally-Friendly Disposal of Materials and Components

SIPLACE products are manufactured using only materials and parts that can be easily separated and

disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the installa-

tion, dismantling or operation of the machine.

1.2.8

1.2.8 Electromagnetic Compatibility (EMC)

Electromagnetic Compatibility (EMC)

All SIPLACE products are designed and tested for professional use in industrial applications. Electro-

magnetic compatibility in terms of the emission of interference cannot be guaranteed in any other envi-

ronment.

1.2.9

1.2.9 Use of Original SIPLACE Accessories and Spare Parts

Use of Original SIPLACE Accessories and Spare Parts

Only use original spare parts and authorized accessories. The use of other parts will affect safety and

will invalidate the liability for any consequential damage.

Noise emissions 75 dB (A)

At maximum moving speed of the tower (short-

time, approx. 1 second)

80 dB (A)

NOTICE

The company operating the system has sole responsibility for the proper, environmentally-

friendly disposal of machines, working materials, consumables and wear parts.

► Please observe your national statutory provisions for waste disposal and environmental

protection.