JANETS_SPE_EN.pdf - 第23页

JaNets Prod uct S pecific ations 2. JaNets Exter nal Output Fu nction Overview 2-3 Devices and op tions required fo r each function The devices and options (OP) of the external output function of JaNets are shown b elow …

JaNets Product Specifications

2. JaNets External Output Function Overview

2-2

Overview of the Functions

The functional overview of the External Output Function is described below.

Table 1.2.1 Functional overview of the External Output Function

Function name

Overview

How to Use Each

Function

Outputs error information.

Outputs backed-up data such as information output to an external system and the environ-

mental settings.

Line configuration infor-

mation output function

Outputs the information on the line configuration and machine setting which are controlled

by Shop floor setup.

Machine monitoring

function

Outputs information on production management.

Outputs the status information of the machine.

Outputs information on the tact.

The machine event

notifying function *1

Outputs the information (machine production start/end information, etc.) related to machine

events.

The mis-placement

preventive function *2

Checks the interrelation among the feeder, placement position and component (reel) and

mis-placement.

Extracts the component names and component serial by using the standard expression from

the character string of a bar code scanned by the machine side.

Extends the output information of the machine event notifying function and gives machine

reel information and residual number of components.

Off-line Setup function *3

Creates information on loading of a feeder or a component for a container (such as a bank

and a stacker) to load it to machines collectively.

Traceability function *4

Extends the output information of the machine event notifying function and gives traceability

information (PWB code information and placement information).

IFS-NX linkage function

Obtains information from IFS-NX to output machine event information and/or machine reel

information.

Parts stock management

function *6

Creates component lists required for production from the optimized production program.

(The component lists can be registered as BOM information by importing them into ISM.) *8

Updates the residual number of components registered in ISM at the end of production of

each PWB. *6

Performs automatic delivery. (Estimates “No components” at the end of production about

each PWB and sends a delivery order to ISM before occurrence of “No components”.) *7 *9

Machine operation

function

Requests the machine to temporarily stop, abort the current operation or perform a cycle

stop.

Asks an external system whether it can produce a PWB at start of production as the start

interlock function of the machine too.

Symptom management

function

Outputs the machine operation information.

*1 To use all the event notifying functions of the machine, install the external output option and MounterExtension on

the machine side.

*2 To use the mis-placement preventive function, install the external output option and GCI on the machine side and

enables the mis-placement preventive function in the machine setup. Install the barcode reader in the machine.

*3 To use the Off-line Setup function, make settings of the External Output option (*2) and enable the Off-line Setup

function with the machine.

*4 To use the traceability function, install the external output option on the machine side and enable the traceability

function in the machine setup. (It is necessary to use the mis-placement preventive function as a prerequisite.) The

hardware of the code reader must be purchased on the machine side.

*5 To use the IFS-NX linkage function, IFS-NX is required. (IFS-NX has to be set to be used with the machine, and the

option installer for IFS-NX is required. Any option installer of the machine for the External Output Function (such as

the installers for the machine event notification function, mis-placement preventive function and traceability function)

is not required.)

*6 To use the component storage control function, ISM is required.

*7 The mis-placement preventive function of an external output option is used on the machine side and the reel is

loaded. (This is not applicable when IFS-NX is used.)

*8 When the system extracts a component normally via the ISM Connection, it does not create any BOM information

because the component list is used for component extraction information if components are set to be extracted in the

normal way via the ISM Connection.

*9 When the system extracts a component in case of emergency via the ISM Connection, it sends a component deliv-

ery (extraction) order to the ISM Connection.

JaNets Product Specifications

2. JaNets External Output Function Overview

2-3

Devices and options required for each function

The devices and options (OP) of the external output function of JaNets are shown below.

There are 3 kinds of installer of external output options on the machine side.

Install one of them.

Table 1.3.1 The devices and OP of the external output function

Function to be used

JaNets

Machine *7

ISM

IFS-

External

output OP

External output OP

Bar-

code

reader

GCI MEX

IFS

-NXO

P 2D,

etc.

OP1

OP2

OP3

How to Use Each Function

○ - ○ - - - - - - - - -

Line configuration output function

○ - ○ - - - - - - - - -

Machine monitoring function *4

○ △

○ - - - - - - - - -

The machine event notifying function *6

○ - ○ ○ - - - - ○ - - -

The mis-placement preventive function *7

○ - ○ - ○ - ○ ○ ○ - - -

Off-line Setup function *8

○ - ○ - ○ - - - - -

△

Traceability function *7

○ - ○ - - ○ ○ ○ ○ - - -

IFS-NX linkage function *10

○

- - - - - ○ ○ - ○

Parts stock

management

function

BOM information

output

○

○ - - - - - - - -

Residual number

updating and au-

tomatic delivery to

ISM *11

○

Machine operation function

○ - ○ - - - - - - - - -

Symptom management function

○ - ○

- - - - - - - - -

How to Use Each Function *5

○ △

○ - - - - - - - - -

(○: Required / △: Required in some cases / －: Not required)

*1 The mis-placement preventive function of an external output option is used on the machine side and the reel is

loaded. (This is not applicable when IFS-NX is used.)

*2 OP installer to turn on External output function + Machine event notifying function + Mis-placement preventive func-

tion + Off-line Setup function

*3 OP installer to turn on External output function + Machine event notifying function + Mis-placement preventive func-

tion + Traceability function + Off-line Setup function

*4 The OP1 installer or the corresponding INFS-NX option is required to output production tact information.

* LM is an option of Line Manager.

* EM is an option of Equipment Manager.

* MEX is used as a MounterExtension installer.

*5 The Equipment Manger option is required only to output information on a printer or an inspection machine.

*6 To output the following information, you do not have to install the MounterExtension. However, you have to use the

Program Downloader to download/upload a production program.

- Production program downloading start information

- Production program downloading end information

- Production program uploading start information

- Production program uploading end information

Note that you have to use the IFS-NX linkage function to output the following information:

- Component shortage warning information

Machine production preparation start information is output also even though the Program Downloader is not used.

*7 The mis-placement preventive function and traceability function of the external output function cannot be used to-

gether with the mis-placement preventive function and traceability function of IFS-NX.

*8 The Off-line Setup function requires OP2 or higher.

*9 When the system is equipped with ISM, you can control the number of remaining components.

*10 To use the IFS-NX linkage function, IFS-NX is required. Any of OP1, OP2 and OP3 is not required.

*11 When ISM is used, the function “Residual number updating and automatic delivery to ISM” is enabled.

JaNets Product Specifications

2. JaNets External Output Function Overview

2-4

Installing the JaNets External Output Function on a Mounter.

See Section 8.3 “Procedure for Installing onto a Mounter” of Chapter 8 “Appendix” for how to install

the External Output Function on a mounter.

System Configuration

Supported machine models

The machine models that support the JaNets External output function are shown below.

Table 1.4.1 Supported machine models

Item Specifications Supported machine models

Maximum number of machines that can

be connected to one production line

RS-1/RS-1R

RX-7/RX-7R/RX-8

RX-6 (RX-6B *1) /RX-6R

KE-3010A/3020VA/3020VRA

KE-3010/3020V/3020VR

KE-3020/3020R

KE-2070/2080/2080R

KE-2050R/2055R/2060R

KE-2050/2060

FX-3/FX-3R/FX-3RA

KD-2077

JM-10/20/100

RP-1 *2

RP-2 *2 *3

RV-1/2/2-3D *2

・

Any combination of machine.

Maximum number of lines that can be

connected

15 line

Maximum number of machines that can

be connected

*1 An RX-6B shall be supported as an RX-6.

*2 The Equipment Manager license is required so that the system can be linked with a printer or an

inspection machine.

*3 When you use an RP-2, specify “GenericPrinter” as a machine model to create machine information

with the Shopfloor Setup. Note that the supported functions are the same as those of an RP-1.

However, the “Start interlock” of the machine operation function cannot be used.