JANETS_SPE_EN.pdf - 第25页

JaNets Prod uct S pecific ations 2. JaNets Exter nal Output Fu nction Overview 2-5 Functions supported with each machine model Functions of t he JaNets External Outp ut Function s upported with eac h machine model a re s…

100%1 / 35
JaNets Product Specifications
2. JaNets External Output Function Overview
2-4
Installing the JaNets External Output Function on a Mounter.
See Section 8.3 “Procedure for Installing onto a Mounter” of Chapter 8 “Appendix” for how to install
the External Output Function on a mounter.
System Configuration
Supported machine models
The machine models that support the JaNets External output function are shown below.
Table 1.4.1 Supported machine models
Item Specifications Supported machine models
Maximum number of machines that can
be connected to one production line
10
RS-1/RS-1R
RX-7/RX-7R/RX-8
RX-6 (RX-6B *1) /RX-6R
KE-3010A/3020VA/3020VRA
KE-3010/3020V/3020VR
KE-3020/3020R
KE-2070/2080/2080R
KE-2050R/2055R/2060R
KE-2050/2060
FX-3/FX-3R/FX-3RA
KD-2077
JM-10/20/100
RP-1 *2
RP-2 *2 *3
RV-1/2/2-3D *2
・
Any combination of machine.
Maximum number of lines that can be
connected
15 line
Maximum number of machines that can
be connected
15
*1 An RX-6B shall be supported as an RX-6.
*2 The Equipment Manager license is required so that the system can be linked with a printer or an
inspection machine.
*3 When you use an RP-2, specify “GenericPrinter” as a machine model to create machine information
with the Shopfloor Setup. Note that the supported functions are the same as those of an RP-1.
However, the “Start interlock” of the machine operation function cannot be used.
JaNets Product Specifications
2. JaNets External Output Function Overview
2-5
Functions supported with each machine model
Functions of the JaNets External Output Function supported with each machine model are shown
below.
Table 1.4.2 List 1 of functions supported with each machine model
Function to be used
RS-1
Series
RS-6
Series
RX-7/8
Series
KE-3000
Series
FX-3
Series
KE-2050
/60
Series
KE-2070/80
Series
KD-
2077
Line configuration information output function
○
○
○
○
○
○
○
○
Machine monitoring function
○
○
○
○
○
○
○
○
Machine event notifying function
○
○
○
○
○
○
○
-
Misplacement preventive function
○
○
○
○
○
○
○
-
Off-line Setup function
○
-
-
-
-
-
-
-
Traceability function
○
○
○
○
○
○
○
-
IFS-NX linkage function
○
○
○
○
○
○
○
-
Parts stock management function
○
○
○
○
○
○
○
-
Machine operation function
○
○
○
○
○
○
○
○
Symptom management function
○
○
○
○
○
○
○
○
Table 1.4.3 List 2 of functions supported with each machine model
Function to be used JM-10
JM-20
/JM-100
RV
Series
RP-1
Line configuration information output function
○
○
○
○
Machine monitoring function
○
○
○
○
Machine event notifying function
-
○
-
-
Misplacement preventive function
-
○
-
-
Off-line Setup function
-
-
-
-
Traceability function
-
○
-
-
IFS-NX linkage function
-
○
-
-
Parts stock management function
-
○
-
-
Machine operation function
○
○
○
○
Symptom management function
○
○
○
-
Output information based on a function to be used
Information that can be output based on a function to be used by the JaNets External Output Func-
tion is described below.
See Chapter 7 “How to Use Each Function” for the detailed variations of information output de-
pending on functions.
Shared functions
Information that can be output with the shared functions is described below.
Table 1.4.4 List of output information (with the shared functions)
Information name
Command character
string
Description
Error information Error Outputs error information of the JaNets External Output Function.
Line configuration information output function
Information that can be output with the line configuration information output functions is described
below.
Table 1.4.5 List of output information (with the line configuration output function)
Information name
Command character
string
Description
Line list infor-
mation
LineList Output a list of line names created with the Shopfloor Setup.
Line information Line
Outputs information on a machine belonging to a production line
created with the Shopfloor Setup.
JaNets Product Specifications
2. JaNets External Output Function Overview
2-6
Machine monitoring function
Information that can be output with the machine monitoring functions is described below.
Table 1.4.6 List of output information (with the machine monitoring function)
Information name
Command character
string
Description
Machine status
information
MachineStatus
Outputs machine status information (such as the status of the signal
lights and machine status transition: production, stop and waiting).
Total production
management in-
formation
TotalProduction
Outputs management information on production performed with a
machine.
Production tact
information
ProductionTactTime
Outputs the machine production tact (machine tact/line tact/champion
tact).
Information that can be output with each machine model is described below.
Table 1.4.7 List 1 of information that can be output with each machine model
(with the machine monitoring function)
Information name
RS-1
Series
RX-6
Series
RX-7/8
Series
KE-
3000
Series
FX-3
Series
KE-
2050/60
Series
KE-
2070/80
Series
KD-
2077
Machine status information ○ ○ ○ ○ ○ ○ ○ ○
Total production management information
○ ○ ○ ○ ○ ○ ○ ○
Production tact information ○ ○ - ○ - - - -
Table 1.4.8 List 2 of information that can be output with each machine model
(with the machine monitoring function)
Information name JM-10
JM-20
/JM-100
RV
Series
RP-1
Machine status information
○
○
○
○
Total production management information
○
○
○
○
Production tact information
-
○
-
-
Machine event notifying information
Information that can be output with the machine event notifying function is described below.
Table 1.4.9 List of output information (with the machine event notifying function)
Information name
Command character string
Description
Machine startup information MachinePowerOn Outputs information on a machine that started up.
Machine shutdown information MachinePowerOff Outputs information on a machine that was shut down.
Start button pressing information
MachineStartSelected
Outputs information on a machine that was put in the production
state.
Board ID load information *3 *7 ReadPwbId Outputs information on a board ID loaded with a machine.
Machine production start infor-
mation
*4 *7
ProductionStart
Outputs information on production that started placing a component
on a board.
Machine production end infor-
mation *2 *5 *7
ProductionComplete
Outputs information on production that finished placing a compo-
nent(s) on a board.
Machine production pause in-
formation *7
ProductionPause Outputs information on production stopped temporarily.
Machine production abort infor-
mation *2 *5 *7
ProductionAbort Outputs information on aborted production.
Component consumption infor-
mation *1
ComponentConsumption
Outputs information on a component(s) used not for production and
that on a component(s) only picked up and not placed on a board
during production of a single PWB.
* Information on a component(s) used for placement is output as
the Machine production end information/abort information.
Mispick information *1 Mispick Output information on a component picked up by mistake.
Component shortage information
*1
OutOfCompo Outputs information on components that run out.
Splicing point detection infor-
mation *1
SpliceDetected
Output information on a component at which a splicing point was
detected.
Machine production resume
information *7
ProductionResume
Outputs information on production that resumed from the pause
state.