M6ex_ServiceManual_e.pdf - 第98页
5 Materials 5-6 Conveyor belt
5 Materials
5-5
Conveyor Section
Part Name Part No. Qty. Remarks
BELT 1 LC0-M9BA1-00X 2
No buffer, no extension at both ends
BELT 2 LC0-M9BA2-00X 2
With buffer, for entrance side with
no extension at entrance
BELT 3 LC0-M9BA3-00X 2
With buffer, for exit side with no
extension at exit
BELT 4 LC0-M9BA4-00X 2
No buffer, 200mm extension at one
end
BELT 5 LC0-M9BA5-00X 2
With buffer, for entrance side with
200mm extension at entrance
BELT 6 LC0-M9BA6-00X 2
With buffer, for exit side with
200mm extension at exit
BELT 7 LC0-M9BA7-00X 2
No buffer, 200mm extension at
both ends
Note: The belt to be used varies with the conveyor specifications of the machine.
5 Materials
5-6
Conveyor belt
Index
Ａ
Air Passage, 3-3
Ｃ
Camera, 3-22
Cleaning of disk drive, 4-22
Connecting loader with machine, 1-15
Control boards, 4-21
Ｄ
Daily checks, 2-2
DI Monitor, 4-14
Disk drive, 4-22
DO Control, 4-8
Ｅ
Electrodes, 4-23
Environmental requirements, 1-2
Ｆ
Feeder bank, 4-23
Flange Seal, 3-19
Floppy disk, 4-22
Ｈ
Handling floppy disk, 4-22
Head Manifold Section, 3-3
Ｉ
Inspection for Head/Nozzle Clogging and
Solenoid Valve Breakdown, 3-4
Installation, 1-2
Ｌ
Lens filter, 3-21
Ｍ
Manual check, 2-4
Monthly check, 2-5
Ｎ
Nozzle, 3-6
Nozzle Holder, 3-29
Nozzle holder seal, 3-12
Nozzle, Locate Pin, Pushup Pin, etc, 5-2
Ｐ
Pre-process and post-process, 1-16
Production line, 1-5
Ｒ
Replacement Parts, 5-4
Ｓ
Serial I/O, 4-7
Signal I/O, 4-2
Signal Input Map, 4-14
Signal Input Monitor, 4-2
Signal Output Control, 4-5
Signal Output Control window, 4-5
Signal Output Map, 4-8
Ｖ
visual check, 2-2
Ｗ
Write protect, 4-22