00198612-01_VD_SIPLACE_Pro_16.0_R18-2_DE_EN.pdf - 第14页

SIPLACE Pro 16.0 (R 18 - 2) / Version Desc ription 11/2018 Edition 14 Processing Feeder s from ASM Assembly Systems – Measuri ngFeeder X – SIPLA CE Glue Feeder – Reject co nveyor with X - adapt er – Linear Dip ping Modul…

100%1 / 70
SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition
13
3.2 Supported DEK Printer Software Versions and Printer Types
DEK Printer Version Printer Types
DEK Printer Software Version V09
(Printer Programming 1.0)
DEK Printers running V09 software
*)
Table 3-2: Supported DEK printer software versions and printer types
*)
The version number listed above is accurate at the time of compiling this document.
Please note that it is subject to change without prior notice. For further details please contact your
sales representative.
3.3 Supported Feeder Types
The following feeders are supported by SIPLACE Pro:
Feeder Modules from ASM Assembly Systems
– 4 mm – 104 mm X-feeder
– 8 mm - 88 mm E (E-series only)
– 2x8 mm X-feeder
– 16 mm XN-feeder
– Surftape AX (8 mm, 12 mm, 16 mm)
– LED feeder TE
LED feeder HS
– SIPLACE JTF-S (X-series S and SX1/SX2 V2 only)
– SIPLACE JTF-M (X-series S, X4i S micron and SX1/SX2 V2 only)
– SIPLACE JTF-ML 14X and JTF-ML 18X (TX-series only)
– SIPLACE JTF-ML2 7/7 and JTF-ML2 9/9 (TX-series only)
– JTF-MW E (E-series only)
– SIPLACE BulkFeeder X
– Arbitrary Carrier X
– Conveyor Carrier X
– Carrier X (XTH) (X2, X3, X4 on location 2 and 4 only)
– Carrier SX (SX1/SX2 with Twin Head and CPP head only)
– MTC2 (X2, X3, X4 on location 2 and 4, X2 S, X3 S, X4 S on location 2)
– WPC5 / WPC6 (SX1/SX2, X-series S on location 2)
– SIPLACE Wafer Systems (CA-series only)
– Stick feeder with X-adapter
SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition
14
Processing Feeders from ASM Assembly Systems
– MeasuringFeeder X
– SIPLACE Glue Feeder
– Reject conveyor with X-adapter
– Linear Dipping Module X
– Linear Dipping Unit 2 X
– Linear Dipping Unit 2 E (E-series only)
– Label feeder with X-adapter
– Splice sensor X-feeder
Modules from 3
rd
party suppliers
– FFI feeders:
Data IO RoadRunners
– IPTE Multi Stick Feeder:
IPTE MSF 60 AX
IPTE MSF XL80 AX
– SEMO CRF80 tape feeder
SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition
15
4 Features of SIPLACE Pro 16.0
If not differently described, the features of the previous SIPLACE Pro versions are contained in
SIPLACE Pro 16.0. The main new features of SIPLACE Pro 16.0 are listed below.
NOTICE
Detailed information on the individual functions can be found in the Online Help for
SIPLACE Pro.
4.1 Customer-Specific Nozzles – Improvements
The treatment of customer-specific nozzles has been improved as follows:
– Customer-specific nozzles for the C&P20 P and CPP heads can be equipped with a nozzle ID.
A nozzle ID can be specified for 6xxx, 4xxx, 2xxx and 28xx customer-specific nozzles in the
Nozzle Tree View of SIPLACE Pro Desk. The nozzle ID will be sent to the station when a job is
downloaded from SIPLACE Pro.
– The nozzle report will contain the nozzle ID.
– Automatic nozzle ID recognition can be performed for the customer-specific nozzles in the
same way as for standard nozzles at the station.
– The name of customer-specific nozzles will be displayed at the station when a job is
downloaded from SIPLACE Pro.
– Contamination Scan
SIPLACE Vision provides a new nozzle scan for customer-specific nozzles to detect
contamination by solder paste. The Scan Solder Paste Contamination option must be
enabled in the Nozzles tab of the Component Shape Editor. Following parameters are
available and can be changed:
Sensitivity correction
Sensitivity for detection of solder paste contamination. Negative values indicate lower and
positive values higher sensitivity.
Valid values: [-75; +100]. Default value: 0.
Scan after
Number of components to be placed after which a nozzle scan will be performed.
Valid values range from [10; 10.000]. Default value: 100.
The contamination scan is supported for the following camera types:
SST23, SST25, SST28, SST29, SST30, SST33, SST36, SST38, SST41, SST45, SST48 and
SST49.
The operator must start the contamination check manually at the station.