00198612-01_VD_SIPLACE_Pro_16.0_R18-2_DE_EN.pdf - 第16页

SIPLACE Pro 16.0 (R 18 - 2) / Version Desc ription 11/2018 Edition 16 4.2 OSC Packa ge Option – Enhance ments Detailed informat ion on the OSC Package features can be found in t he OSC Package User Guide, item no. [00198…

SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition

4 Features of SIPLACE Pro 16.0

If not differently described, the features of the previous SIPLACE Pro versions are contained in

SIPLACE Pro 16.0. The main new features of SIPLACE Pro 16.0 are listed below.

NOTICE

Detailed information on the individual functions can be found in the Online Help for

SIPLACE Pro.

4.1 Customer-Specific Nozzles – Improvements

The treatment of customer-specific nozzles has been improved as follows:

– Customer-specific nozzles for the C&P20 P and CPP heads can be equipped with a nozzle ID.

A nozzle ID can be specified for 6xxx, 4xxx, 2xxx and 28xx customer-specific nozzles in the

Nozzle Tree View of SIPLACE Pro Desk. The nozzle ID will be sent to the station when a job is

downloaded from SIPLACE Pro.

– The nozzle report will contain the nozzle ID.

– Automatic nozzle ID recognition can be performed for the customer-specific nozzles in the

same way as for standard nozzles at the station.

– The name of customer-specific nozzles will be displayed at the station when a job is

downloaded from SIPLACE Pro.

– Contamination Scan

SIPLACE Vision provides a new nozzle scan for customer-specific nozzles to detect

contamination by solder paste. The Scan Solder Paste Contamination option must be

enabled in the Nozzles tab of the Component Shape Editor. Following parameters are

available and can be changed:

Sensitivity correction

Sensitivity for detection of solder paste contamination. Negative values indicate lower and

positive values higher sensitivity.

Valid values: [-75; +100]. Default value: 0.

Scan after

Number of components to be placed after which a nozzle scan will be performed.

Valid values range from [10; 10.000]. Default value: 100.

The contamination scan is supported for the following camera types:

SST23, SST25, SST28, SST29, SST30, SST33, SST36, SST38, SST41, SST45, SST48 and

SST49.

The operator must start the contamination check manually at the station.

SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition

4.2 OSC Package Option – Enhancements

Detailed information on the OSC Package features can be found in the OSC Package User Guide,

item no. [00198374-xx].

The main enhancements made for the OSC Package Option in SIPLACE Pro are listed in the

overview below.

Pin in Paste Height Check for TH and CPP Placement Head

The height check is supported for the TH and CPP placement heads. The functionality is the same

as for the existing height measurement in the Snap-In detection for the Twin VHF placement head,

but the components have centering pins instead of board locks.

The height check can be activated by enabling the new Pin in Paste height check option in the

Handling tab of the Component Shape Editor. The option may only be enabled if the Standard

placement process has been selected. If the Pin in Paste height check option has been enabled,

a value may be entered for the Z-threshold. Default value = 500 µm.

Restrictions

– Not supported on SIPLACE CA4 and CA4 V2 placement machines.

– Only supported together with station software as of version 712.0. If the line does not contain

any station with station software >=712.0, the feature is ignored, and a warning displayed.

Increased Placement Force for TH Placement Head

The placement force has been increased to maximum 30 N for the TH placement head.

Restrictions

– Not supported on SIPLACE X-Series placement machines.

4.3 "IPC-HERMES-9852" – Interface ID

SIPLACE Pro supports the new Interface ID that has been implemented in the

"IPC-HERMES-9852" protocol for Hermes 1.1. This property is used to identify additional input or

output lanes of a special device. Additional lanes may e.g. be used to transport the board back to

the previous device or as output branches for faulty boards. The additional lanes must be

configured on the device itself.

Only the default lanes can be configured in SIPLACE Pro Desk (i.e. transport board from first to

last device on lane 1 or 2) but with the additional Interface ID property.

Figure 4-1: IPC-HERMES-9852 connection configuration dialog

If configured, the Interface ID will be appended to the connection string in the configuration check

result table on the Line Control GUI.

SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition

Format: <device address> | <port> | <interface ID>

All additional interfaces per device lane are added as additional rows in the table.

Figure 4-2: Line Control GUI – Configuration check result table

4.4 Using Placements as Fiducials for Aligning Components

Some boards do not have precise fiducials or any fiducials at all. For these boards, the accuracy of

the components relative to each other is important but not the placements relative to the board. For

this, a special process has been introduced in SIPLACE Pro:

Four components which are using component shapes that are suitable for measuring are placed at

the first stopper of the first placement area. Thereafter, the machine will treat these four

placements as fiducials. For every stopper in every placement area, these four placements will be

measured as fiducials.

In the Board Editor, the process can be selected under Use placements as fiducials.

At least one component shape that shall be placed, must have a fiducial type assigned to it in the

Component Shape Editor. By this, it can be measured as fiducial.

The optimizer will select four placements from all placements of component shapes which can be

measured as fiducial and placements of a component which is set up fixed in the first placement

area.

The component shapes of the selected placements must be taught at the station.

4.5 CPP Placement Head – Increased Placement Force and

Component Weight

The placement force has been increased to maximum 15 N for the CPP placement head. The

component weight has been increased to 20 g in Pick&Place mode.

4.6 Smart Pin Support for SIPLACE TX V2 Series

The automatic Smart Pin Support option is supported for the SIPLACE TX V2-series placement

machines with two gantries – TX2 V2 and TX2 V2i. The fixed Smart Pin Magazine occupies the

tracks 1-6 on a new table type. As default, five pins per lane are required. Optionally, an additional

pin magazine can be put on the station.

The first nozzle magazine(s) of the nozzle changer on the left side cannot be used. If Smart Pin

Support is installed, the first stopper position is set to a negative value to reach all positions on the

board.

If Smart Pin Support is already installed in the target setup, it will be removed during the copy

function and must be added back manually.