00198612-01_VD_SIPLACE_Pro_16.0_R18-2_DE_EN.pdf - 第3页

SIPLACE Pro 16.0 (R 18 - 2) / Version Desc ription 11/2018 Edition 3 Contents 1 Introduction 5 1.1 System Ove rview ................................................................................................ . 6 2 S…

All names identified by ® are registered trademarks of the ASM Assembly Systems GmbH & Co. KG. The

remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes

could violate the rights of the owner.

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information given in this publication is reviewed regularly and any necessary corrections are included in

subsequent editions.

ASM Assembly Systems GmbH & Co. KG Item-no.: 00198612-01

Rupert-Mayer-Strasse 44

81379 München

Germany

www.asm-smt.com

Alle mit dem Schutzrechtsvermerk ® gekennzeichneten Bezeichnungen sind eingetragene Marken der ASM

Assembly Systems GmbH & Co. KG. Die übrigen Bezeichnungen in dieser Schrift können Marken sein, deren

Benutzung durch Dritte für deren Zwecke die Rechte der Inhaber verletzen kann.

Wir haben den Inhalt der Druckschrift auf Übereinstimmung mit der beschriebenen Hard- und Software geprüft.

Dennoch können Abweichungen nicht ausgeschlossen werden, sodass wir für die vollständige Übereinstimmung

keine Gewähr übernehmen. Die Angaben in dieser Druckschrift werden regelmäßig überprüft und notwendige

Korrekturen sind in den nachfolgenden Auflagen enthalten.

ASM Assembly Systems GmbH & Co. KG Artikel-Nr.: 00198612-01

Rupert-Mayer-Straße 44

81379 München

Deutschland

www.asm-smt.com

SIPLACE Pro 16.0 (R18-2) / Version Description 11/2018 Edition

Contents

1 Introduction 5

1.1 System Overview ................................................................................................. 6

2 Scope of Delivery 7

2.1 Packages ............................................................................................................. 7

2.2 Languages ........................................................................................................... 8

2.3 Licenses ............................................................................................................... 9

3 Prerequisites 11

3.1 Supported Station Software Versions and Machine Types ................................ 11

3.2 Supported DEK Printer Software Versions and Printer Types ........................... 13

3.3 Supported Feeder Types ................................................................................... 13

4 Features of SIPLACE Pro 16.0 15

4.1 Customer-Specific Nozzles – Improvements ..................................................... 15

4.2 OSC Package Option – Enhancements............................................................. 16

4.3 "IPC-HERMES-9852" – Interface ID .................................................................. 16

4.4 Using Placements as Fiducials for Aligning Components .................................. 17

4.5 CPP Placement Head – Increased Placement Force and Component

Weight ................................................................................................................ 17

4.6 Smart Pin Support for SIPLACE TX V2 Series .................................................. 17

4.7 Long Board Option (LBO) for SIPLACE TX- and TX V2-Series ......................... 18

4.8 Station Behavior When Using Alternative Tracks .............................................. 18

4.9 Linear Dipping Unit 2 X / Linear Dipping Unit E – Enhancements ..................... 18

4.10 Flux Inspection ................................................................................................... 19

4.11 SIPLACE MeasuringFeeder X ........................................................................... 19

4.12 DEK Printer Support - Enhancements ............................................................... 21

4.13 Cracked Die Inspection ...................................................................................... 21

4.14 Measuring Barcode on Bottom Side of Component........................................... 22

4.15 Disabling Creation of LCU Number .................................................................... 22

4.16 Free Nozzle Orientation ..................................................................................... 22

4.17 Stand-alone Data Model Import Tool ................................................................. 23

4.18 Grid Board Editor – Enhancements ................................................................... 23

4.19 Line Control GUI – Improved Conveyor Lane Settings ...................................... 24

4.20 ASCII Centroid Import Wizard – Enhancements ................................................ 24

4.21 Logging of Changes To User Data .................................................................... 25

4.22 Miscellaneous SIPLACE Pro Improvements and Enhancements ...................... 26

5 Restrictions 27

6 Troubleshooting 29

6.1 Problems and Solutions ..................................................................................... 29

7 Appendix 30

7.1 ASM Error Reporter Service .............................................................................. 30