sj6 uitra.pdf - 第18页
-15- Strong / Normal / Soft Auto, Daylight, Cloudy, T ungsten, Fluorescent, Diving Strong / Normal / Soft Strong / Normal / Soft Strong / Normal / Soft 11 12 13 10 High / Medium / Low Image Quality Color Sharpness Satura…
-14-
22
23
When enabled, the camera
continues recording for the
selected duration after
pressing the recording button
to stop.
Select different metering modes
based on the environment.
Time Lapse
video
recording
Metering
Spot metering,
Center metering,
Average metering
The amount of data used per
unit of time in a video file. Higher
bit rate at the same resolution
generally means better quality
(less compression) but larger
file size.
Bit Rate
High,Medium, Low
Off/ 5S / 10S /
15S / 30S
24
On, Off
Photo Menu Settings
1
2
3
4
NO.
Menu
Parameter Options Description of parameter setting
Adjusts pixel resolution as
needed.
Adjust the shutter speed
according to different environ-
ments. Default by “Auto” .
Corrects fisheye (distortion)
effect when enabled.
After setting the time, the
camera starts to take pictures
automatically after the
countdown ends.
Resolution
Shutter
Speed
Distortion
Calibration
Timer
Auto / 1/30S / 1S /
2S / 5S / 10S
Off / 3S / 5S / 10S
20M（5888x3312）
16M （5376x3024)
14M （5008x2816)
12M （4640x2608)
10M （4320x2432)
8M （3840x2160)
5M （3200x1808)
3M （2560x1440)
2M （1920x1088)
-15-
Strong / Normal / Soft
Auto, Daylight,
Cloudy, Tungsten,
Fluorescent, Diving
Strong / Normal / Soft
Strong / Normal / Soft
Strong / Normal / Soft
11
12
13
10
High / Medium / Low
Image
Quality
Color
Sharpness
Saturation
Contrast
Noise
Reduction
WB
Normal / B&W /
Sepia / Warm / Cold
+3EV ~ -3EV
6
7
9
8
Exposure
Compensation
When the noise of the image is
adjusted to Strong, there will be
less noise. When adjusted to
soft,the noise will increase.The
default selection "Normal".
Adjust the vividness of the color.
Strong: The colors will become
bright-colored. Soft: The color is
slightly grayish white. The
default selection "Normal".
Adjusts the quality of the
captured image. Set to High:
Better image quality. Set to
Medium: Average image quality.
Set to Low: Lower image quality.
On, Off
Lossless
Portrait Mode
5
When enabled, the camera
enters vertical shooting mode.
Strong: the clearer the image
obtained will be, but there will
be more noise. Soft: the less
noise there will be, but the
clarity will be lower and the edge
lines will be relatively blurry. The
default selection "Normal".
1. Corrects color temperature to
reproduce subject colors closer to
what the human eye sees under
different light sources.
2. Controlling WB can produce
photos with different color effects.
Adjusts exposure based on the
shooting environment.
Adjust the color mode according
to your preference.
Adjusts image contrast. Strong
contrast: Darker image. Soft
contrast: Lighter (whiter) image.
The default selection is Standard.
-16-
The device will automatically shut down if no action
is performed within the selected time period.
Turns voice control on or off. Voice control works only
in the system’s default control language.
Chinese / English / Russian / Japanese / Vietnamese /
Thai. You must switch to the corresponding language
to operate the camera by voice.
System Settings
2
3
4
5
6
7
Menu
Description of parameter setting
1
NO.
Language Sets the camera's language.
Date / Time Sets the date and time.
Auto
Power Off
Voice Control
Enter the microphone pairing interface to connect
one microphone device.
Wireless
Microphone
When enabled, rotates the screen image 180 degrees.
Typically used when mounting the camera as a dashcam.
Image
Rotation
Turns the indicator light On or Off.
Indicator light
8
Turns operation prompt sounds (beeps) On or Off.
Prompt Tone
Supported
Voice Control
Languages
14
15
16
On, Off
Average Metering,
Center-weighted
Metering, Spot Metering
Auto / 100 / 200
400 / 800 / 1600 / 3200
ISO
WDR
Metering
Higher ISO increases brightness
but also increases noise.
Select different metering modes
based on the environment.
Balances brightness in overly
bright or dark environments
when enabled.