sj6 uitra.pdf - 第19页

-16- The device will automatically shut down if no action is performed within the selected time period. T urns voice control on or off. Voice control w orks only in the system’ s default control language. Chinese / Engli…

100%1 / 23
-15-
Strong / Normal / Soft
Auto, Daylight,
Cloudy, Tungsten,
Fluorescent, Diving
Strong / Normal / Soft
Strong / Normal / Soft
Strong / Normal / Soft
11
12
13
10
High / Medium / Low
Image
Quality
Color
Sharpness
Saturation
Contrast
Noise
Reduction
WB
Normal / B&W /
Sepia / Warm / Cold
+3EV ~ -3EV
6
7
9
8
Exposure
Compensation
When the noise of the image is
adjusted to Strong, there will be
less noise. When adjusted to
soft,the noise will increase.The
default selection "Normal".
Adjust the vividness of the color.
Strong: The colors will become
bright-colored. Soft: The color is
slightly grayish white. The
default selection "Normal".
Adjusts the quality of the
captured image. Set to High:
Better image quality. Set to
Medium: Average image quality.
Set to Low: Lower image quality.
On, Off
Lossless
Portrait Mode
5
When enabled, the camera
enters vertical shooting mode.
Strong: the clearer the image
obtained will be, but there will
be more noise. Soft: the less
noise there will be, but the
clarity will be lower and the edge
lines will be relatively blurry. The
default selection "Normal".
1. Corrects color temperature to
reproduce subject colors closer to
what the human eye sees under
different light sources.
2. Controlling WB can produce
photos with different color effects.
Adjusts exposure based on the
shooting environment.
Adjust the color mode according
to your preference.
Adjusts image contrast. Strong
contrast: Darker image. Soft
contrast: Lighter (whiter) image.
The default selection is Standard.
-16-
The device will automatically shut down if no action
is performed within the selected time period.
Turns voice control on or off. Voice control works only
in the system’s default control language.
Chinese / English / Russian / Japanese / Vietnamese /
Thai. You must switch to the corresponding language
to operate the camera by voice.
System Settings
2
3
4
5
6
7
Menu
Description of parameter setting
1
NO.
Language Sets the camera's language.
Date / Time Sets the date and time.
Auto
Power Off
Voice Control
Enter the microphone pairing interface to connect
one microphone device.
Wireless
Microphone
When enabled, rotates the screen image 180 degrees.
Typically used when mounting the camera as a dashcam.
Image
Rotation
Turns the indicator light On or Off.
Indicator light
8
Turns operation prompt sounds (beeps) On or Off.
Prompt Tone
Supported
Voice Control
Languages
14
15
16
On, Off
Average Metering,
Center-weighted
Metering, Spot Metering
Auto / 100 / 200
400 / 800 / 1600 / 3200
ISO
WDR
Metering
Higher ISO increases brightness
but also increases noise.
Select different metering modes
based on the environment.
Balances brightness in overly
bright or dark environments
when enabled.
-17-
SJ6 Ultra supports connection with the SJCAM M4 Wireless Microphone for stable
wireless audio recording. Follow the steps below:
1.Activate Camera Pairing: Go to System Settings on the camera and turn on the
Wireless Microphone feature. The camera will enter pairing standby mode.
2.Activate Microphone Pairing: Press and hold the Power Button on the microphone to
turn it on.While the microphone is powered on, press and hold the Pairing Button until
the indicator light shows it has entered pairing mode.
3.Complete the Connection: The camera will automatically search for and pair with the
microphone.
4.Confirm the Connection: Once connected, the camera screen will display “Connect-
ed” and show the microphone’s remaining battery level.
Wireless Microphone Connection Guide
12
11
13
14
15
2.4GHz / 5GHz; If 5GHz WiFi is not available,
switch to 2.4GHz.
Formats the memory card.Warning: This operation will
erase all data on the memory card. Please proceed with
caution.Please operate with caution.
9
WiFi Band
Anti-flicker
10
Puts the screen to sleep after a selected period of
inactivity. Tap the screen to wake it up.
Sets the power frequency mode. 50Hz for PAL
systems (e.g., China), 60Hz for NTSC systems (e.g.,
Taiwan or other regions).
Screen Saver
Turns voice prompts for key actions (e.g., “Recording
started”) on or off.
Voice
Broadcast
Format
Reset Restores all settings to factory defaults.
Version
Displays the camera model and firmware version
information.