192866 Issue 4 - Reel to Reel Manual LoRes.pdf - 第10页
Reel to Reel Manual CUSTOMER USE ORIGINA TOR Name & Department Position T elephone No. Email F ax No. Model Number Software V ersion Machine Serial No. T itle Chapter / Issue State Page No. / F igure No. Company MACH…
Reel to Reel Manual
MANUAL INFORMATION
Quality Manager
ASM Assembly Systems Weymouth Ltd
11 Albany Road
Granby Industrial Estate
Weymouth
Dorset
DT4 9TH
England
Tel: +44 1305 760760
Fax: +44 1305 760123
Information in this manual is subject to change without notice.
No part of this manual may be reproduced, transmitted in any form or means,
electronically or mechanically, Including photocopying and recording, for any
purpose without the express written permission of ASM Assembly Systems
Switzerland GmbH.
Every effort has been made during the composition of this manual to ensure
that the information has been clearly presented and correct in all respects.
If during the use of this manual, errors or omissions are found, or the reader
considers that improvements are necessary to overcome any ambiguity or
inaccuracies, a of the manual change request form should becopy
completed and either faxed or forwarded to the address below,
accompanied with a of the relevant page and/or figure of the manualcopy
with the recommendation.
Reel to Reel Manual
CUSTOMER USE
ORIGINATOR
Name & Department
Position
Telephone No.
Email
Fax No.
Model Number
Software Version
Machine Serial No.
Title
Chapter / Issue State
Page No. / Figure No.
Company
MACHINE TYPE
DETAILS OF CHANGE
ACCEPTED
DETAILS OF CHANGE
MANUALS AFFECTED
ACTION COMPLETE
Date:Author: Customer informed
of action taken:
MANUAL
INTERNAL USE
DATE:
Log No.
YES NO Reason:Priority:
immediate
next release
Tech Refs User Install. S/AloneEng Spec GA/Ccts Other
TECHNICAL REFERENCE
OVERVIEW
Chapter Issue 1, Apr 15 Reel to Reel Manual 1.1
CHAPTER 1 TECHNICAL REFERENCE
OVERVIEW
Figure 1-1 Reel to Reel Mechanism
The Reel to Reel machine prints onto flexible materials (such as Mylar®,
Melinex® and carbon paper), supplied as one continuous sheet on a reel
(product reel). The product reel is fed through the printing machine and may be
attached to a take-up reel downline.
During the print cycle, the product reel is clamped by the board clamps and
vacuum flattens the product reel to the vacuum top plate. After the print cycle,
the product reel is pulled through the machine by the inner transport vacuum
plate.
Item Description Item Description
1 Safety Cover 8 Vacuum Top Plate (Tooling)
2 Safety Interlock Vane 9 Board Clamps
3 Outer Transport Vacuum Plate (Static) 10 Product Guides
4 Outer Transport Clamps 11 Tooling Table
5 Safety Interlock Switch 12 Inner Transport Vacuum Plate (Moving) Drive Shaft
6 Inner Transport Clamps 13 Inner Transport Vacuum Plate (Moving)
7 Transport Carriage Belts 14 Lid Bolt