TM6148.Force control options manual in YC8.pdf - 第15页
SMT Softw are Engineering Group IM Operations Y AMAHA MOTOR CO., L T D. Error Message The below is error messages con cerned to this function. Error Message Error No. T itle Causes and solutions 2969 Parts insertion Erro…
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
Retry method selection
Select a retry method for insertion parts with short insertion error.
(See Fig. 4.2.3.2.1)
Fig. 4.2.3.2.1 Retry Method Selection
Select “Not retry” or “Retry”, then press the [Close] button.
If the [Close] button is pressed with “No Selected” is checked, "Ea2975 Insert parts : Retry
method selection" appears. In that case, press the [OK] button to go back to the retry
method selection screen.
When “Retry” is selected, mounting operation is performed again.
Retry timing depends on the setting of [Board] - [Board] - [Retry Sequence].
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
Error Message
The below is error messages concerned to this function.
Error Message
Error
No.
Title Causes and solutions
2969 Parts insertion Errors < Causes >
Insertion operation, it did not reach the target height.
There is a possibility that parts are not inserted properly.
Make sure safety, please remove the target parts on the
head or on the board.
Press the [ERROR CLEAR] button, then confirm the parts
condition and select retry or not on the next window.
Head x
Parts xxxx
Parts Name xxxxxxxxxxxxxxxxxxxxx
Mount No xxxx
Current Pos xxx.xx
< Solutions >
- Confirm insert position
- Confirm parts height
- Confirm set force value
* "Ea2969 Parts insertion Errors" is output to the error log.
2974 Parts insertion Errors < Causes >
Insertion operation, it did not reach the target height.
There is a possibility that parts are not inserted properly.
Make sure safety, please remove the target parts on the
head or on the board.
Press the [ERROR CLEAR] button, then confirm the parts
condition and select retry or not on the next window.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
Head x
Parts xxxx
Parts Name xxxxxxxxxxxxxxxxxxxxx
Mount No xxxx
Current Pos xxx.xx
Short Distance x.xxx
< Solutions >
- Confirm insert position
- Confirm parts height
- Confirm set force value
* "Ea2974 Parts insertion Errors" is output to the error log.
2975 Insert parts : Retry method
selection
< Causes >
Selection of retry method is the "No Selected".
Please select "Retry" or "Not retry".
Restrictions
This function works only with rigid type heads.
When no rigid type head is used, please make a setting to disable Force Control.