DT_ELMC-V3-EN_REV-B.1_L.pdf - 第35页

ELECTROVA P ® E LMC 35 4 COMMISS IONIN G Before operation, please check that your install ation complies w ith the manufacturer's technical recommendations. Check all power cables electrical connections. Remove the …

ELECTROVAP® ELMC

3.10 OPTION: Transformer connection

ELECTROVAP® ELMC

4 COMMISSIONING

Before operation, please check that your installation complies with the

manufacturer's technical recommendations. Check all power cables electrical

connections. Remove the blocking blue foam ring from the tank.

Marker 1: Validation & change menu button

Marker 2: Upward button

Marker 3: Downward button

Marker 4: Manual drain button for maintenance

Marker 5: LED = Steam production indication

• Open the main water supply valve.

• Switch on the main power supply (power and control voltages).

• Switch on the unit switch.

• If the unit asks you for a commissioning code, note the serial number on the

nameplate and contact your agent to obtain this code.

• Enter your three-digit code by doing this:

Press one of the keys 1, 2, 3 and the display will show you 0XX, with the flashing zero to eventually change it by

pressing 2 or 3.

Once arrived at your digit, validate it by pressing key 1 and your second digit flashes. Repeat the previous two

operations to show the last two digits.

Very important: do not forget to validate the last digit.

• Enter water quality in the displayed menu.

• The device is ready to respond any production request.

• During steam production, the LED (5) lights up.

Fig. 4 Humidifier display

ELECTROVAP® ELMC

5 SYSTEM MANAGEMENT

5.1 USER INFORMATION MENU (READ ONLY)

Any press on the enter key from any of

these menus

MENU: HUMIDIFIER

CONFIGURATION

WWW.DEVATEC.COM/

ELECTROVAP / V3-35

ACTUAL CONTROL SIGNAL

Y XX %

ACTUAL CONTROL SIGNAL

Y XX. Xuu

CHECK RH SENSOR

Y XX %

SET POINT -- % Hr

HR MEASURE - - %

If in digital control

Uu- mA or V depending on the

regulation

If HR < 7%

If in an HR probe

MENU: HUMIDIFIER

STATUS

STEAM HUMIDIFIER

ELMC 10 3x400V

STEAM PRODUCED

XX.Xkg XX.XKG/h

ACTUAL CURRENT

Xx. X A