00195348-0402 - MM WPC4-5-6_en.pdf - 第11页

Maintenance Manual WPC4, WPC5 and WPC6 Greasing the Linear Guide of the Feed Axis 4-Monthly Maintenance Maintenance Manual SIPLACE WPC4, WPC5 and WPC6 11 4-Monthly Ma intenance 2.3 4-Monthly Maintenance Greasing t he Lin…

Maintenance Manual WPC4, WPC5 and WPC6

Maintenance Plan Materials

10 Maintenance Manual SIPLACE WPC4, WPC5 and WPC6

Maintenance Plan

2.2 Maintenance Plan

As the basis for our maintenance intervals, we assume the following machine utilization: eight hours per

shift, three shifts per day, five days a week and four weeks a month.

► Enter the maintenance work performed in the maintenance plan.

► We recommend that you adhere to the order in which maintenance work is performed.

Interval Area Equipment/spare part Performed on

Day - -

Week - -

Month - -

monthly

- -

monthly

Greasing the Linear Guide of the Feed

Axis

Oil INTERFLON Fin Lube TF

Greasing the Linear Guide of the Non-

Stop Module

Oil INTERFLON Fin Lube TF

Year Greasing the Lifting Axis Spindle and

Guidance.

Grease gun, INTERFLON FIN

GREASE MP 2/3

Grease the height adjustment spindle. Brush

Isoflex Topas NCA 52

Clean the feeder axis guidance rails. Lint-free cloths

Clean, grease and check the toothed

belt.

Lint-free cloths , brush, Isoflex

Topas NCA 52, belt tension

measuring device, belt tension

setting gauges

Check the waffle pack trays and clean if

necessary.

Lint-free cloths, ethanol

Check the fiducial. Lint-free cloths, ethanol

Checking the Fan -

Checking Machine Safety -

Maintenance Manual WPC4, WPC5 and WPC6

Greasing the Linear Guide of the Feed Axis 4-Monthly Maintenance

Maintenance Manual SIPLACE WPC4, WPC5 and WPC6 11

4-Monthly Maintenance

2.3 4-Monthly Maintenance

Greasing the Linear Guide of the Feed Axis

2.3.1 Greasing the Linear Guide of the Feed Axis

► Perform a reference run of the WPC.

► Move the WPC into the transport position.

► Switch the WPC off at the main switch.

► (1) Clean the linear guide of the feed axis by means

of a lint-free cloth an ethyl alcohol.

CAUTION! No oil onto the toothed belt

When applying oil to the linear guide make sure that no

oil gets on the toothed belt.

Cover the toothed belt (2) of the feed axis with a lint-free

cloth (1).

► Spray "INTERFLON Fin Lube TF" thinly on the

accessible area of the feed axis (1).

► In order to get a better access for cleaning or

greasing the linear guide you can move the driver by

hand.

► Wipe any residual oil away with a lint-free cloth.

► Switch the WPC on at the main switch and perform a

reference run.

► Start a short continuous run of the feed axis to

distribute the oil evenly.

► If necessary, use a lint-free cloth to remove any

residual oil that has dropped down from the feed axis.

Maintenance Manual WPC4, WPC5 and WPC6

4-Monthly Maintenance Greasing the Linear Guide of the Non-Stop Module

12 Maintenance Manual SIPLACE WPC4, WPC5 and WPC6

Greasing the Linear Guide of the Non-Stop Module

2.3.2 Greasing the Linear Guide of the Non-Stop Module

WPC6 only

► Perform a reference run of the WPC.

► Move the WPC into the transport position.

► Switch the WPC off at the main switch.

► Loosen the 4 fixing screws (1) fastening the cover of

the Non-Stop Module (2).

► Loosen the fixing screw (3) of the grounding and the

electric connections (4) and remove the cover.

► (1) Clean the linear guide of the Non-Stop Module by

means of a lint-free cloth an ethyl alcohol.

CAUTION! No oil onto the toothed belt

When applying oil to the linear guide make sure that no

oil gets on the toothed belt.

Cover the toothed belt (2) of the feed axis with a lint-free

cloth (1).