00195348-0402 - MM WPC4-5-6_en.pdf - 第8页

Introduction Abbreviations Safety Instructions for Maintenance Tasks 8 Maintenance Manual SIPLACE WPC4, WPC5 and WPC6 Abbreviat ions 1.2 Abbreviations Abbreviations Description CO Component ESD Electrosta tic s ensitive …

Introduction

Safety Instructions for Maintenance Tasks Safety Instructions

Maintenance Manual SIPLACE WPC4, WPC5 and WPC6 7

CAUTION! SIPLACE cleaning tissue

Harmful: may cause lung damage if swallowed.

Do not inhale vapor / aerosol.

Avoid contact with the skin. If swallowed, do not induce

vomiting. See medical attention immediately and show

the packaging or label.

Wear latex gloves while using the cleaning tissue.

CAUTION

Consumable materials

Observe the safety data sheets for consumable materials!

CAUTION

Cleaning and lubrication

► Always use ethanol for cleaning – do not use solvents.

► NEVER use compressed air to clean units inside the placement machine or modules.

CAUTION

Danger of cutting on the IC and FC camera

There is a risk of cutting your fingers along the edges of the mirror.

► Wear laboratory gloves as protection and avoid touching the edges.

► The laboratory gloves are also required for effective cleaning (fingerprints!).

CAUTION

Only one person must be present at each component preparation station at any given time.

This is to ensure the safety of the operator and the safety of the second person. Pulling in the

component trolley is a two-handed operation, so only one person can be reliably protected from

the possible risks.

Introduction

Abbreviations Safety Instructions for Maintenance Tasks

8 Maintenance Manual SIPLACE WPC4, WPC5 and WPC6

Abbreviations

1.2 Abbreviations

Abbreviations Description

CO Component

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

WPC Waffle pack changer

WPC4 Waffle Pack Changer Version 4

WPC 5 Waffle Pack Changer Version 5

WPC6 Waffle Pack Changer Version 6

Maintenance Manual WPC4, WPC5 and WPC6

Tools and Equipment Maintenance Tools and Equipment

Maintenance Manual SIPLACE WPC4, WPC5 and WPC6 9

Maintenance Manual WPC4, WPC5 and WPC6

2 Maintenance Manual WPC4, WPC5 and WPC6

Maintenance Tools and Equipment

2.1 Maintenance Tools and Equipment

The following list of materials contains all the tools, equipment and materials required for maintaining the

WPC.

Tools and Equipment

2.1.1 Tools and Equipment

Collect the following tools and equipment before you start maintenance work.

Materials

2.1.2 Materials

Collect the following materials before you start maintenance work.

NOTICE

This maintenance manual is based on the WPC4. It is, however, also valid for the WPC5 and

WPC6. Should there be relevant differences for the WPC5 or WPC6 these are described

accordingly in this manual. Most photos and graphics show the WPC4. They are basically valid

for the WPC5 and WPC6 as well.

Tools and Equipment Item number

MATO grease gun, full nozzle stream R1/8 with tube 00384212-xx

17 mm open-ended wrench -

Set of Allen wrenches -

Brush with short bristles -

Materials Item number

Ethanol -

Lint-free cloths -

ISOFLEX TOPAS NCA 52, tin 1kg or

ISOFLEX TOPAS NCA 52, tube 50 g

00328369-xx

00330850-xx

INTERFLON FIN GREASE MP2/3 in 400ml cartridge 03038300-xx

Oil INTERFLON Fin Lube TF 03039002-xx