00195348-0402 - MM WPC4-5-6_en.pdf - 第26页

Item no.: 00195348-040 2 ASM Assembly Systems GmbH & Co. KG Rupert-Mayer-Strasse 44 81379 München Germany www.siplace.com

Maintenance Manual WPC4, WPC5 and WPC6

Annual Maintenance Checking the Fan

24 Maintenance Manual SIPLACE WPC4, WPC5 and WPC6

Checking the Fan

2.4.9 Checking the Fan

Check the Ma chine Safety

2.4.10 Check the Machine Safety

Check the safety features.

► Connect the WPC to the placement machine.

► Start the WPC continuous run.

► During operation, press the emergency stop button on the WPC, while a WPT is being changed. The

WPC and the placement machine should come to an immediate standstill.

► Start the WPC continuous run.

► During operation, open the plexiglass door on the WPC, while a WPT is being changed. The WPC

axes must come to an immediate standstill.

► Start the WPC continuous run.

► During operation, press the emergency stop button on the placement machine, while a WPT is being

changed. The WPC should come to an immediate standstill.

► Check the plexiglass door for damage. If large parts of the plexiglass door have broken off, the door

is no longer a reliable safety cover. In this case, replace the door.

► Make sure that the actuator for the safety switch on the plexiglass door has been screwed into place

tightly.

► Check the connection plugs, tension reliefs and cable hoses (power and data cables) for damage. If

necessary, replace these or contact SIPLACE Service.

► Unscrew the right-hand cover plate.

► Check whether the fan can be turned in the control

unit. To do this, switch on the WPC. If you look into

the control unit from below, you should be able to see

whether the fan turns or not. If the fan does not turn,

contact SIPLACE Service.

CAUTION! Risk of injury

Do not reach into the fan from below.

NOTICE

Filter mats/air filter

There are no filter mats/air filters installed in the WPC.

DANGER

Safety Features

The WPC may only be operated when all safety features are in place and fully functional.

► If the safety of the WPC is no longer guaranteed, contact SIPLACE Service without delay.

Item no.: 00195348-0402 ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany