00196351-06_UM_ACT_DE_EN.pdf - 第101页
ACT - Accurac y Check Tool / User Manual 09/2015 Edition 11 Figure 2-4: Manual waffle pack tray holder for S-table (carrier) f or the glass components Figure 2-5: Manual waffle pack tray holder for X-table (carrier) f or…
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
10
2.2.2 Individual Components in the ACT Set
Measuring plate (glass plate) in metal frame (Figure 2-1 and Figure 2-2):
The glass components and the measuring plate are kept in a storage case.
Figure 2-1: Storage case for measuring plate Figure 2-2: Storage case for glass components
The glass components used for ACT are placed in the milled divisions in the waffle pack tray
(Figure 2-3).
Figure 2-3: Waffle pack tray for glass components
Key:
(1) Waffle pack tray
(2) Waffle pack tray carrier
(3) Glass components
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
11
Figure 2-4: Manual waffle pack tray holder for S-table (carrier) for the glass components
Figure 2-5: Manual waffle pack tray holder for X-table (carrier) for the glass components
Figure 2-6: Measuring plate for ACT
ACT - Accuracy Check Tool / User Manual 09/2015 Edition
12
3 Preparatory Work
3.1 General Hardware Preparations
► Ensure that the glass components are placed correctly in the divisions. The components should
be placed face downwards into the tray, see Figure 3-1.
Figure 3-1: Arrangement of the glass components; vacuum nozzle HANDI-VAC
NOTICE
Handling the glass components
► Do not touch the underside of the glass surface where the QFP structure is applied
when you handle the glass components.
► Use the "HANDI VAC HV-4-ESD" vacuum nozzle [00334547-xx] to suck the
components on the upside where name and serial number are imprinted.
Feeder for ceramic components (Cerampads)
Figure 3-2: Feeder for ceramic components (S-feeder in figure)
Key:
(1) Ceramic components (Cerampads) (2) Feeder