Specification SIPLACE CA-Series2014版.pdf - 第18页
18 Placement Heads Nozzle Changers Description Nozzle changers incr ease the flexibility of the placement heads when it comes to pro- cessing different compo- nents. The nozzle configu ration can be quickly modified for …
17
Placement Heads
SIPLACE TwinStar (TH)
SIPLACE TwinStar
a
a) Not in conjunction with SWS and not on location 2/4.
With component camera type 33
(fine pitch camera)
With component camera type 25
(flip chip camera)
Component range
b
b) Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards, the
component packaging tolerances and the component tolerances.
0402 to SO, PLCC, QFP, BGA, special
components, bare dies, flip-chips
0201 to SO, PLCC, QFP, sockets,
plugs, BGA, special components, bare
dies, flip-chips, shields
Component specs
c
Max. height
Min. lead pitch
Min. lead width
Min. ball pitch
Min. ball diameter
Min. dimensions
Max. dimensions
Max. weight
d
c) If the MultiStar and TwinStar are combined in the same placement area, the maximum component height may be restricted.
d) If standard nozzles are used
25 mm (higher available on request)
0.3 mm
0.15 mm
0.35 mm
0.2 mm
1.0 mm x 0.5 mm
55 mm x 45 mm (single measurement)
For use with two nozzles (multiple mea-
surement)
50 mm x 50 mm or
69 mm x 10 mm
For use with one nozzle
85 mm x 85 mm or
125 mm x 10 mm
up to 200 mm x 125 mm (with restric-
tions)
100 g
25 mm (higher available on request)
0.25 mm
0.1 mm
0.14 mm
0.08 mm
0.6 mm x 0.3 mm
16 mm x 16 mm (single measurement)
55 mm x 55 mm (multiple measure-
ment)
100 g
Programmable set-down force 1.0 N - 15 N
2.0 N - 30 N
e
e) SIPLACE High-Force Head.
1.0 N - 15 N
2.0 N - 30 N
d
Nozzle types
f
f) Over 300 different nozzles and 100 gripper types are available, with an extensive nozzle database available online.
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
5xx (standard)
4xx + adapter
8xx + adapter
9xx + adapter
Gripper
Nozzle spacing for P&P heads 70.8 mm 70.8 mm
X/Y accuracy
g
g) The SIPLACE benchmark value is measured during the machine acceptance tests. It corresponds to the conditions set out
in the SIPLACE scope of service and supply.
± 26 µm / 3σ, ± 35 µm / 4σ ± 22 µm / 3σ, ± 30 µm / 4σ
Angular accuracy ± 0.05° / 3σ, ± 0.07°/ 4σ ± 0.05° / 3σ, ± 0.07° / 4σ
Illumination levels 6 6
Possible illumination level set-
tings
256
6
256
6
18
Placement Heads
Nozzle Changers
Description
Nozzle changers increase
the flexibility of the placement
heads when it comes to pro-
cessing different compo-
nents. The
nozzle configuration can be
quickly modified for new
placement jobs. Precisely
defined positions and perfect
nozzle seat in the garage
ensure minimum radial
eccentricity on the placement
head.
The nozzle changer for the
MultiStar and the SpeedStar
is fitted with a monitoring cir-
cuit. which checks whether
the nozzle magazine is
seated correctly on the
mount. In addition, the nozzle
changers recognize whether
the magazines are for 1xx,
20xx or 28xx nozzles by the
code.
Nozzle changer for the SIPLACE MultiStar and
SIPLACE SpeedStar
Magazine for two
standard nozzles
Magazine for one special nozzle, gripper
Nozzle changer for the SIPLACE TwinStar
1 magazine for 9 nozzles
of type 28xx
5 magazines for 12 nozzles
of type 20xx
6 magazines for 12 nozzles of
type 10xx, 11xx or 12xx
Nozzle changer for the SIPLACE SpeedStar
19
Placement Heads
Nozzle Changers
Technical Data
Nozzle changer for the SIPLACE SpeedStar
Number of magazines
a
a) All magazines in the nozzle changer must be configured.
6
Number of nozzle holders 72
Standard configuration
Nozzle changer on X table
Nozzle changer on SWS
6 magazines with 72 nozzle garages in row 1 only
6 magazines with 72 nozzle garages in row 1
6 magazines with 72 nozzle garages in row 2
Nozzle types 10xx, 11xx, 12xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE MultiStar
Number of magazines
a
6
Number of nozzle holders 60 (20xx nozzles)
9 (28xx nozzles)
SpeedStar: 72 (10xx, 11xx, 12xx nozzles)
Standard configuration
Nozzle changer on X table
Nozzle changer on SWS
6 magazines with 72 nozzle garages in row 1
6 magazines with 72 nozzle garages in row 2
6 magazines with 72 nozzle garages in row 1
6 magazines with 72 nozzle garages in row 2
Nozzle types 10xx, 11xx, 12xx
20xx, 28xx
Compressed air connection 0.45 MPa (4.5 bar)
Nozzle changer for the SIPLACE TwinStar
Number of magazines
max. 12 magazines for max. 24 nozzle garages
max. 10 magazines for max. 20 nozzle garages
Number of nozzle holders may be freely configured
Nozzle types 4xx with adapter
5xx (standard)
9xx with adapter
Special nozzle, gripper
Compressed air connection 0.45 MPa (4.5 bar)