Specification SIPLACE CA-Series2014版.pdf - 第26页

26 Sample Configuration Services As an additional service, ASM can prov ide complete integration of your SIPLACE CA machine in your produc- tion line. With our ex tensive expertise an d by usin g the right tools an d equ…

100%1 / 64
25
PCB Warpage
PCB warpage during placement
PCB warpage downwards, max. 0.5 mm
Use magnetic pin supports to achieve this
value.
When there is warpage under 2 mm, the
inkspots in the center of the board are also
within the focus of the digital camera. When
all the tolerances are taken into account,
this value is reduced to 1.5 mm.
You should also note that the warpage also
reduces the component height.
Magnetic pin support
26
Sample Configuration
Services
As an additional service,
ASM can provide complete
integration of your SIPLACE
CA machine in your produc-
tion line. With our extensive
expertise and by using the
right tools and equipment,
we can ensure that the instal-
lation process runs smoothly
and efficiently.
However, this requires that
you clarify the infrastructure
aspects in advance and
make any necessary chang-
es at your production facility.
Safety instructions
Read the operating instruc-
tions before starting to set up
and commission the place-
ment machine. The applica-
ble accident prevention
regulations concerning the
transportation of heavy
goods must be followed.
1
2
4
3
2
3
4
1
27
Component Feeding
SIPLACE X-Series Component Trolley
Description
The component trolleys are
stand-alone modules that
can be set up with feeder
modules at an external setup
area. Up to four component
trolleys can be docked onto
the machine. A component
changeover table can be re-
placed with just a short inter-
ruption of the production
process. The chassis runs
smoothly and is easy to
maneuver.
The changeover table has a
capacity of up to 40 locations
for 8 mm X tape feeder mod-
ules. The total capacity with
four component trolleys is
thus 160 tracks x 8 mm.
Dummy feeder modules are
used at unassigned locations
to protect the operators.
The component feeders are
at rest during the placement
process - allowing tapes to
be spliced without stopping
the machine.
With the help of an optional
component barcode reader
and the Setup Center option,
the barcodes on the tape
reels can be read and
checked, thus guaranteeing
that the components are allo-
cated to the correct tracks.
Location 1
Location 3
Location 2
Location 4