Specification SIPLACE CA-Series2014版.pdf - 第59页
59 Technical Data Transportation and Delivery Conditions for SWS Transport dime nsions and weig ht Means of transport A fork-lift truck with the followi ng specification will be needed to carry the machine in its crate: …
58
Technical Data
Transportation and Delivery Conditions for
Machine
Transport dimensions and weight
Means of transport
A fork-lift truck with the following specification will be needed
to carry the machine in its crate:
Length
Width
Height
2404 mm
2790 mm
1600 mm
Weight
CA4
Dispatch Dispatch
within Europe overseas
4004 kg 4504 kg
Fork length
Lifting power
Clear fork width
Min. 1800 mm
Min. 6000 kg
Min. 350 mm
Description
Within Europe, the machine
is delivered on a robust
wooden pallet. If sent over-
seas, the machine is pack-
aged in a wooden crate.
Configuration when deliv-
ered
• The extension kit on the
PCB input side, with the
computer unit or the box
PC, is disconnected from
the basic machine.
• All electrical cables to the
basic machine are discon-
nected.
• The track on the single
conveyor is set to a width
of 210 mm. On the dual
conveyor, the default
width of lane 1 is 100 mm
and of lane 2 is 210 mm.
• The input conveyors of the
single and dual conveyor
are dismantled.
The electrical cables to the
conveyor motors and light
barriers are disconnected.
• Both keyboards and the
monitors are disconnect-
ed.
• The main fault indicator is
dismantled.
Attachment point
for the fork-lift
Attachment point
for the fork-lift
59
Technical Data
Transportation and Delivery Conditions for SWS
Transport dimensions and weight
Means of transport
A fork-lift truck with the following specification will be needed
to carry the machine in its crate:
Length
Width
Height
1700 mm
1250 mm
1600 mm
Weight
SWS
Dispatch Dispatch
within Europe overseas
390 kg 473 kg
Fork length
Lifting power
Clear fork width
Min. 1800 mm
Min. 1500 kg
Min. 350 mm
Description
Within Europe, the machine
is delivered on a robust
wooden pallet. If sent over-
seas, the SWS is packaged
in a wooden crate.
Attachment point
for the fork-lift
60
Option List
Placement Machine
Available options CA4 Notes
PCB alignment, single conveyor X
PCB alignment, dual conveyor X
Long board X
1D PCB barcode scanner X
2D PCB barcode scanner X
PCB barcode scanner assembly kit X
SIPLACE SpeedStar C&P 20 M X
SIPLACE MultiStar CPP X
SIPLACE TwinStar X
Magnetic pin support X
03015/01005 components X
Component camera, type 30 X Only MultiStar CPP
Component camera, type 41 X Only SpeedStar C&P20 M
Stationary component camera, type 33 (fine
pitch)
X Only MultiStar CPP and TwinStar
With restrictions (see Configuration Over-
view on page 62.
Stationary component camera, type 25 (flip
chip)
X Only TwinStar
With restrictions (see Configuration Over-
view on page 62
Component camera, type 34 X
High Force Head X
Vision teach place X
Nozzle Changers X
Sensor for the component reject bin X
SIPLACE X-Series Component Trolley X
Splice point recognition for X feeder mod-
ules
X
Tray holder for SIPLACE X X Only SpeedStar C&P20 M
Support for an additional tape reel
SIPLACE X-series
X
X-Series feeder module adapter X
Linear Dipping Unit (LDU-X) X
Feeder module cover flap X
110/208 V conversion kit X
Vacuum pump X
Vacuum pump connection kit X
Embedded Wafer Level Ballgrid Array
(eWLB)
X On request
Wafer Level Fan Out (WLFO) - on request Incl. Chuck and Chiller on request
MTC Without stationary camera at location 2 and
location 4 on request