Specification SIPLACE CA-Series2014版.pdf - 第29页
29 Component Feeding SIPLACE Wafer System Technical Data Dimensions and weight Length x width 1.580 mm x 720 mm Weight 350 kg Electrical ratings Supply voltage 3 x 400 VAC, 50 Hz (Europe) 3 x 208 VAC, 60 Hz (USA) Total o…
28
Component Feeding
SIPLACE Wafer System
The new SIPLACE Wafer
System (SWS) provides a
fully automatic wafer and
chip handling system.
The SWS is completely inte-
grated into the locations of
the SIPLACE CA placement
system. Each location can be
equipped with an SWS or an
X table.
The SWS functions like a
feeder for the SIPLACE sys-
tem and transports the dies
from the wafer to a single,
fixed pickup position for the
placement head.
The placement head picks
the die up from the SWS and
places this on the board as
done during SMD handling.
The SWS is shown as a spe-
cial feeder type in SIPRO.
The SIPLACE CA system is
programmed as usual for the
SIPLACE X series.
The die handling is pro-
grammed via the SWS GUI.
The main parameters to be
programmed are as follows:
– Wafer and die dimen-
sions
– Die recognition
– Die ejection parameters
– Wafer map system
– Link to the component
programmed in SI-
PLACE Pro
29
Component Feeding
SIPLACE Wafer System
Technical Data
Dimensions and weight
Length x width 1.580 mm x 720 mm
Weight 350 kg
Electrical ratings
Supply voltage 3 x 400 VAC, 50 Hz (Europe)
3 x 208 VAC, 60 Hz (USA)
Total output 1.5 kW
Rated current 2.7 A at 3 x 400 VAC
4.2 A at 3 x 208 VAC
Fuse 3 x 16 A
Nominal current consumption of largest consumer 2 A
Noise emissions
Max. noise emissions 74 dB (A)
Permissible environmental impact
Room temperature Between 15°C and 35°C
Atmospheric humidity 30 - 75 %
(No higher than 45% on average to
prevent any possibility of condensa-
tion on the machine)
30
Component Feeding
Component Trolley
Technical Data
SIPLACE X-Series Component Trolley
Length x width 752 mm x 592 mm
Height at
900 mm PCB conveyor height
930 mm PCB conveyor height
950 mm PCB conveyor height
890 mm
920 mm
940 mm
PCB conveyor height 900 mm ± 15 mm (option)
930 mm ± 15 mm (standard)
950 mm ± 15 mm (SMEMA option)
Weight
Without feeder modules
With feeder modules at all
locations
80.4 kg
139.6 kg
Reel diameter
Standard
Maximum
up to 432 mm (17“)
483 mm (19“)
Locations for feeder modules max. 40
Waste container
for pieces of used tape
Changeover table
SIPLACE X-Series component trolley
Tape container