4OM-1610-002_w.pdf - 第262页

4OM-1610 3-1 15 3. Error IDs and Remedial Procedures : Chap.3 101 1-002 Error ID Error Name, Description, Cause, and Remedy 4b5301 Disposal error Error in the disposal Please retry to dispose. Please remove the cmpnt in …

100%1 / 339
4OM-1610
3-114
3. Error IDs and Remedial Procedures : Chap.3
1011-002
Error ID Error Name, Description, Cause, and Remedy
4b4b01 Cutter Error
(Atnishing
AutoRun)Cutteroperation(Rear)isnotcompletedwithinaspecied
time.
Please push Emergency Stop button.
4b4b02 Cutter Error
(Atnishing
AutoRun)Cutteroperation(Front)isnotcompletedwithinaspecied
time.
Please push Emergency Stop button.
4b4c01 Flux dispensing Error
Flux dispensing sequence error
-----
4b4c02 Flux dispensing Error
Cannotdetect
componentsexistenceafterdispensingux.Errorinuxsensor.
-----
4b4d01 Flux dispensing unit Error
Flux dispensing Unit stopped in emergency.
-----
4b4d02 Flux dispensing unit Error
Flux dispensing Unit is not set.
Pleaseset
uxdispensingunittothedeterminedplace.
4b4d03 Flux dispensing unit Error
Motor alarm.
Pleasedetach
uxdispensingunit,andconrmwhetherthereisafactorofload
or not.
4b4d04 Flux dispensing unit Error
Flux dispensing was not completed within predetermined time.
1.Please
conrmrotationwith[rotation]button.
2.Pleaseconrmwhetherthevolumeofrotaryspeedisnot"0".
3.PleaseconrmwhetherRotationPhotosensorisresponsive.
4.Pleaseconrmwhethertimingbelthassomeproblems.
4b4e01 Flux material shortage
Noux
onthedrum.PleasesupplyFlux.
-----
4b4f01 Nocmpnt
afteruxdispensing(Sensor)
Could not detect cmpnt on nozzle tip. There is a possibility that picked-up cmpnt
is fallen on the drum.
Pleasedetachuxdispensingunit,andthenremovecomponentsonthedrum.
4b5001 Nocmpnt
afteruxdispensing(Recog)
Could not detect cmpnt on nozzle tip. There is a possibility that picked-up cmpnt
is fallen on the drum.
Pleasedetachuxdispensingunit,andthenremovecomponentsonthedrum.
4b5101 Recycle conveyor error
It was impossible to detect the Cmpnt passing the passing check sensor.
Please remove all the components on the recycle conveyor.
4b5201 Impossible disposal(Disposal box)
It is impossible to send cmpnt to disposal box for discard because it is too large.
Please carry out disposal after inserting the recycle conveyor.
4OM-1610
3-115
3. Error IDs and Remedial Procedures : Chap.3
1011-002
Error ID Error Name, Description, Cause, and Remedy
4b5301 Disposal error
Error in the disposal
Please retry to dispose. Please remove the cmpnt in the head and restart up if
there is still an error.
T4C12
4OM-1610
3-116
3. Error IDs and Remedial Procedures : Chap.3
1011-002
3.11 Handling Error
Error ID Error Name, Description, Cause, and Remedy
500101 Comp. Missing (Sensor)
Comp. Missing (Sensor)
There is a possibility that the picked comps. have fallen on the feeder and please
conrmit.
500301 Comp. Missing (Recog)
Comp. Missing (Recog)
There is a possibility that the picked comps. have fallen on the feeder and please
conrmit.
500401 Comp. Recog Error
Comp. Recog Error
-----
500501 Shortage of Component
Shortage of Component
-----
500502 Feeder Reload Stop
Feeder Reload Stop (Splicing)
-----
500c01 Comp. Vertical(Sensor)
Comp. Vertical(Sensor)
-----
500f01 Comp. Thickness(Sensor)
Comp. Thickness(Sensor)
-----
501001
-----
T4C13