4OM-1610-002_w.pdf - 第58页

4OM-1610 1-7 1. Outline of Maintenance : Chap.1 (4) Syringe Maker : TERUMO This gun can be used for two types of greases. Use the syringes and the nozzle properly. Two Types of Greases : DAPHNE EPONEX GREASE No. 1 MOLYNO…

100%1 / 339
4OM-1610
1-6
1. Outline of Maintenance : Chap.1
Speciedlubricationtools
(1) Brush
Use a brush whose bristles do not come off if possible.
Notice
Do not use a brush for ball screws and splines.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease or oil by hand.
(3) Hand Grease Gun
Standard : KH-120
Part No. : 228A022
Maker
: Yamada Corporation
Note
Use this gun only for DAPHNE EPONEX GREASE No. 1.
Reference
Refer to the attached instruction manuals for the hand grease gun for the
usage.
F4A4
•
Attachment for Hand Grease Gun KH-120
Standard Shape Part No. Remarks
Type N
216M0440 THK
Type H
216M0439 THK
Type U
216M0438 THK
Type P
0920H11Q THK
SPK-3C
228A0021
Yamada
Corporation
T4A4
Note
It is not attached to the machine. Purchase it separately if necessary.
1011-002
4OM-1610
1-7
1. Outline of Maintenance : Chap.1
(4) Syringe
Maker : TERUMO
This gun can be used for two types of greases.
Use the syringes and the nozzle properly.
Two Types of Greases : DAPHNE EPONEX GREASE No. 1
MOLYNOC GREASE AP1
Appearance
F4A5
228A0171
216A0451
4091613108
Standard Shape Part No. Remarks
Syringe
Nozzle No.18
(Color : Green)
Nozzle No.19
(Color : Brown)
Maker : TERUMO
10 ml SS-10-LZ
Maker : SAN-EI TECH
Inside Diameter : f 0.84
Tapered Nozzle #5118TT-B
Maker : NIPRO
Inside Diameter : f 0.79
Length : 65 mm Flat End
0916D712 Length :145 mmNozzle No. 49
T4A5
1011-002
4OM-1610
1-8
1. Outline of Maintenance : Chap.1
1.3 Items for Periodic Maintenance
The items (inspection, cleaning, lubrication, etc.) that require periodic
maintenance are classied and described based on each individual devices.
Reference
Refer to "2. Maintenance Check List" in "Chapter 1" for the maintenance based
on frequency of use.
Notice
The * -marks represent that the items require maintenance only for the
rsttime.
Followthe○-markedmaintenancecycleforthesubsequentuse.
Device Name
Inspection Cleaning,
and Lubricating Spots
Work
Maintenance Cycle
Daily Weekly Monthly
Every
3 Months
Every
6 Months
Yearly
3.2.1 Air Source
Main Air Pressure
Inspection
○
Air Blowing Pressure
Inspection
○
Z Clamp Pressure
Inspection
○
Drain
Cleaning
○
Filter
Cleaning
○
3.2.2 Vacuum System
Vacuum Pressure
Inspection
○
Filter
Cleaning
○
3.2.3 Component
Recognition Camera
Section
Component Recognition
Camera
Cleaning
○
Component Storage Box
Cleaning
○
Hanenaito
Cleaning
○
Fiducial Mark
Cleaning
○
QFP Glass Plate Jig
Cleaning
○
Teaching Plate
Cleaning
○
3.2.4 Feeder Base
Driving Section
Worm Gear
Lubrication
○
3.2.5 Feeder Cart Section
Groove on Feeder Base
Cleaning
○
Upper Surface of Feeder
Base
Cleaning
○
Real Box
Cleaning
○
Scrap Box
Cleaning
○
Upper Surface of
Suppressor
Cleaning
○
T4A6
1011-002