4OM-1610-002_w.pdf - 第79页
4OM-1610 1-28 3. Maintenance Spots : Chap.1 101 1-002 W ARNING Pay close attention to the cutter blade during the maintenance work. • Lack of attention will result in a hand injury, etc. Wear gloves and take the greatest…
4OM-1610
1-27
3. Maintenance Spots : Chap.1
1011-002
WARNING
Pay close attention to the cutter blade during the
maintenance work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in
performing the work.
•
Be sure to attach the cutter blade cover to the
cut unit during the maintenance work for safety
purposes.
Linear Guides
Every 3 Months Lubrication
(DAPHNE EPONEX GREASE No. 1)
Required Time: 10 minutes
(1) Remove 12 screws.
(2)
Use Type N nozzle.
Type N
Note
Wipe old grease out using a rag and apply new grease
onto the linear guide (upper and lower sides).
(1) Remove 12 screws.
(2) Insert the nozzle in the hole and supply grease.
(3) Wipe out overflowed grease.
(DAPHNE EPONEX GREASE No. 1)
Required Time: 10 minutes
Every 3 Months Lubrication
Neidle Bearing
Use Type P nozzle.
Type P
Note
F4A21
4OM-1610
1-28
3. Maintenance Spots : Chap.1
1011-002
WARNING
Pay close attention to the cutter blade during the
maintenance work.
•
Lack of attention will result in a hand injury, etc.
Wear gloves and take the greatest care in
performing the work.
•
Be sure to attach the cutter blade cover to the
cut unit during the maintenance work for safety
purposes.
Attachment Position of Cut Unit Fixing Jig
(1) Remove 11 screws and detach the cover.
(2) Use the cutter unit fixing jig with the tape clamp closed to fix the urethane clamp section.
Replacement Jig Attached
(3) Remove the bolts (6 locations)
on the shield cover.
(4) Change the flat ring.
(5) Put the shield cover and attach the bolts (6 locations) on it.
(Tightening Torque: 18.6 to 22.6Ncm (1.9 to 23 kgkm))
Bolt
Bolt
Flat Ring
Every Year Replacement Required Time: 10 minutes
F4A22
CAUTION
Whentheatringiscut,takecarenottogetinjured
by the commercially available cutter.
4OM-1610
1-29
3. Maintenance Spots : Chap.1
0911-001
Removed fluorine-processed sheet.
Front Safety Bar
(2) Remove the tape guide.
(1) Remove the front safety bar and take out the cutter
from the cart.
(3) Remove five screws.
(4) Replace the fluorine sheet.
Fluorine Sheet
Every Year Replacement Required Time: 15 minutes
Catch Lock
(a) When the cutter is to be placed on the cart,
fix the two sections on the connector securely.
(b) When the cutter is to be placed on the cart,
insert the cutter to the end and fix it with the catch lock (two locations) securely.
(c) Make sure to attach the safety cover.
Note
F4A23