4OM-1064-001.pdf - 第246页
9910-001 Tg0249-PM-MM 10. HDD/FDD OPERA TION Display 3-200 10.1 SA VE ALL BACKUP DA T A Display This function can be used to temporarily save data before version improve- ment operation of the machine software, analyze d…
9910-001 Tg0249-PM-MM
10. HDD/FDD OPERATION Display
3-199
10. HDD/FDD OPERATION Display
When the [HDD/FDD OPERATION] key is pressed at the “SPECIAL SEL.”
display, the following display appears on the screen.
[SAVE ALL BACKUP DATA] Key
All backup data can be saved from the machine side to floppy disks (4
pcs.).
[PATTERN PROGRAM] Key
The pattern program can be saved on or loaded from floppy disks.
[OFFSET DATA] Key
When this key is pressed, the “HDD/FDD OPERATION - OFFSET DATA”
display appears on the screen, enabling you to save the offset data on a
floppy disk or read it from the floppy disk.
[DEVICE DATA] Key
When this key is pressed, the “HDD/FDD OPERATION - DEVICE DATA”
display appears on the screen, enabling you to save the device data on a
floppy disk or read it from the floppy disk.
[PLACEMENT HEAD/NOZZLE DATA] Key
When this key is pressed, the “HDD/FDD OPERATION - PLACEMENT
HEAD /NOZZLE DATA” display appears on the screen, enabling you to
save the nozzle stocker data on a floppy disk or read it from the floppy disk.
[NOZZLE DATA] Key
When this key is pressed, the “HDD/FDD OPERATION - NOZZLE DATA”
display appears on the screen, enabling you to save the nozzle type data on
a floppy disk or read it from the floppy disk.
[RECALL MESSAGES] Key
When this key is pressed, the “HDD/FDD OPERATION - RECALL MES-
SAGES” display appears on the screen, enabling you to save the recalled
data (recalled messages) on a floppy disk or read it from the floppy disk.
Fig. 3.118
9910-001 Tg0249-PM-MM
10. HDD/FDD OPERATION Display
3-200
10.1 SAVE ALL BACKUP DATA Display
This function can be used to temporarily save data before version improve-
ment operation of the machine software, analyze data after an error has oc-
curred, and save such data that cannot be exchanged between the machine and
the programming device (option). It is recommended that all backup data should
be saved on floppy disks.
Note: Special operation is required when all backup data must be loaded.
When the [SAVE ALL BACKUP DATA] key is pressed at the “HDD/FDD
OPERATION” display, the following display appears on the screen.
Operation Procedure
(1) Prepare four pieces of 2HD floppy disks (1.44 MB, DOS-Formatted).
Label the floppy disks “1/4”, “2/4”, “3/4”, and “4/4” individually.
(2) Insert the floppy disk (labeled 1/4) into FDD and press the [SAVE] key.
• After the data is written (saved), a message is issued, reminding that
the floppy disk should be replaced with another one.
(3) Insert the floppy disk (labeled 2/4) into FDD and press the [SAVE] key.
(4) Follow the same procedure until all four disks are used up.
(5) After all data is saved, a message is issued, indicating that the save opera-
tion is completed.
• While the data is being saved, a [CANCEL] key and a progress bar
appear in the display.
• When the [CANCEL] key is pressed, the save operation is interrupted
and the “HDD/FDD OPERATION” display appears on the screen.
Fig. 3.119
9910-001 Tg0249-PM-MM
10. HDD/FDD OPERATION Display
3-201
Created Files
Shown below are the files and the addresses created in the four floppy disks.
Table 3.14
FD File Name Address Remarks
First Disk am1 xx.vzi a00000h to afffffh
x Anumber is
automatically
allocated to “xx” in
the file name.
Second Disk am2 xx.vzi b00000h to bfffffh
x A number is
automatically
allocated to “xx” in
the file name.
Third Disk am3 xx.vzi c00000h to cfffffh
x A number is
automatically
allocated to “xx” in
the file name.
Fourth Disk am4 xx.vzi d00000h to dfffffh
x A number is
automatically
allocated to “xx” in
the file name.