GL541保养手册.pdf
Manual Update N otice The following manual has been revised and rereleased: Manual title: GL-541E Maintenance Manual Manual n umber (updated editi on): MNT-GL541-3.6E Manual number (previous edition): MNT-GL541-3.5E Dat …
Manual Update Notice
The following manual has been revised and rereleased:
Manual title: GL-541E Maintenance Manual
Manual number (updated edition): MNT-GL541-3.6E
Manual number (previous edition): MNT-GL541-3.5E
Date of issue: September 28, 2001
The main changes that have been made are detailed in the table below.
Chapter and Section Summary of changes
Safety Guidelines Revised.
Chapter 3 Changeover
1. Changing a Syrige
2. Changing and Storing
Needles
The procedure of replacing the syringe
assembly has been corrected.
Minor changes and corrections have also been
made at various locations throughout the
manual.
Note:
The pages that have been revised can be downloaded from the “Manual
Updates” section of Fuji’s website. Users should download the required
pages and insert them into the existing manual. For a copy of the entire
manual, contact your nearest Fuji sales representative or send an e-mail
request to the address below.
E-mail : intnetqst@fuji.co.jp
GL-541E
Maintenance Manual
MNT-GL541-3.6E
R
Copyrights
All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual
may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or
reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.
Trademark Rights
is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the
following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,
Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the
U.S.A.
Warranty and Liability
Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to
any of the following:
• The use of third party parts.
• The use of non-genuine Fuji parts.
• Incorrect settings made by the customer.
• Improper use of Fuji equipment.
Notice
Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as a
result of the use of this manual.
Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual without
notice.
Every effort has been made to ensure that this manual is correct in every detail. However, please
contact Fuji in the unlikely event that errors or omissions are detected.
R