SA_MAES4S_en.pdf - 第4页

4 1.1 Instructions Important information and instructions in this documentation are designated as follows: Danger! Draws your attention to an exceptionally grave, impending danger to your health or life. ! W arning! Indi…

Contents

1 Introduction ............................................................................................................................................ 4

1.1 Instructions ...............................................................................................................................................4

1.2 Intended Use ............................................................................................................................................4

1.3 Safety Instructions ....................................................................................................................................5

2 Technical Data ........................................................................................................................................6

3 Overview ................................................................................................................................................. 7

3.1 Views without covers and cable ...............................................................................................................7

3.2 Tools .........................................................................................................................................................8

3.3 Contents of Delivery .................................................................................................................................8

4 Test and Change Device Parts ..............................................................................................................9

4.1 Changing the Upper Blade .......................................................................................................................9

4.2 Adjustment of the Upper Blade Stopper .................................................................................................10

4.3 Changing the Linear Blade ......................................................................................................................11

4.4 Adjusting the Linear Blade ......................................................................................................................11

4.5 Check the Blade Alignment ....................................................................................................................12

4.6 Changing the hub to main motor ............................................................................................................13

4.7 Changing the Control Panel / Emergency Switch .................................................................................. 14

4.8 Changing the Belt ...................................................................................................................................14

4.9 Changing the Energy Track ....................................................................................................................15

4.10 Check the Sensors .................................................................................................................................15

4.10.1 Check the Sensors via Control Panel ...............................................................................................16

4.10.2 Check the Sensors on PCB ..............................................................................................................17

5 Errors ....................................................................................................................................................19

6 Spare Parts Drawings ..........................................................................................................................20

6.1 SidePartsCProle,LinearBlade ..........................................................................................................20

6.2 Main Motor ............................................................................................................................................. 21

6.3 Upper Beam, Control Panel ................................................................................................................... 22

6.4 Power Supply .........................................................................................................................................23

6.5 Carriage With Roller Blade .....................................................................................................................24

1.1 Instructions

Important information and instructions in this documentation are designated as follows:

Danger!

Draws your attention to an exceptionally grave, impending danger to your health or life.

Warning!

Indicates a hazardous situation that could lead to injuries or material damage.

Attention!

Draws attention to possible dangers, material damage or loss of quality.

Notice!

Gives you tips. They make a working sequence easier or draw attention to important working processes.



Environment!

Gives you tips on protecting the environment.



Handling instruction



Reference to section, position, illustration number or document.



Option(accessories,peripheralequipment,specialttings).

Video

Reference to a video on the website to this topic.

1.2 Intended Use

• The device is manufactured in accordance with the current technological status and the recognized safety rules.

However, danger to the life and limb of the user or third parties and/or damage to the device and other tangible

assets can arise during use.

• The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with

regard to safety and dangers as stated in the operating manual.

• The device is intended exclusively for separating pre-scored PCB's. Any other use or use going beyond this

shall be regarded as improper use. The manufacturer/supplier shall not be liable for damage resulting from

unauthorized use; the user shall bear the risk alone.

• Usage for the intended purpose also includes complying with the operating manual, including the manufacturer‘s

maintenancerecommendationsandspecications.

Notice!

The complete documentation can also currently be found in the Internet.

1.3 Safety Instructions

• Thedeviceisconguredforvoltages of 100 or 240 V AC. It only has to be plugged into a grounded socket.

• Hazard by electrical charge. Provide an earthing connection via press stud.

1 Introduction

• Only connect the device to other devices which have a protective low voltage.

• Switch off all affected devices (e.g. conveyor belt) before connecting or unlinking.

• Risk of hand injury. Wear protective gloves while PCB separating.

• Ensure that people‘s clothing, hair, jewelry etc. do not come into contact with the exposed rotating blade.

• In an emergency situation, actuate the emergency stop switch in the control panel by tight pressing. This inter-

rupts the voltage supply to the device.

• The device may only be used in a dry environment, do not expose it to moisture (sprays of water, mists, etc.).

• Do not use the device in an explosive atmosphere.

• Do not use the device close to high-voltage power lines.

• Work going beyond this may only be performed by trained personnel or service technicians.

• Unauthorized interference with electronic modules or their software can cause malfunctions.

• Otherunauthorizedworkonormodicationstothedevicecanalsoendangeroperationalsafety.

• There are various warning stickers on the device. They draw your attention to dangers.

Warning stickers must therefore not be removed, as then you and other people cannot be aware of dangers and

may be injured.

Danger!

Danger to life and limb from power supply.

 Do not open the device casing.

1 Introduction