00196737-07_IM_eWinXP_DE_EN.pdf - 第14页

W indows XP Em bedded / I nstallat ion Ma nual Ausgabe 06/2013 Ed ition 14 4.2.3 BIOS Setting s fo r 627C / 827C BoxPCs wi th 60x a nd 70x Station S oftwa re Version s ► Set the f ollowin g values in BIO S: Un d er Pow e…

Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition

4.2.2 BIOS Settings for 627B / 827B BoxPCs with 60x und 70x Station Software

Versions

► Set the following values in BIOS:

Under Main / Hardware Options:

PCI-MPI/DP [ Disabled ]

Safecard Functions [ Disabled ]

Fan Control [ Enabled ]

Under Advanced / SATA/PATA Configuration:

SATA Controller Mode [ Compatible ]

Under Advanced:

Core Multi-processing [ Enabled ] for station software 70x

Core Multi-processing [ Disabled ] for station software 60x

Under Advanced:

Installed O/S [ WinXP ]

Under Boot the following boot priority sequence:

1: USB CDROM:

2: SATA0: xxxxxxxxxx

3: ......

Under Exit / Profile:

Profile: [User]

► Exit BIOS with Exit / Exit saving changes / Yes.

Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition

4.2.3 BIOS Settings for 627C / 827C BoxPCs with 60x and 70x Station Software

Versions

► Set the following values in BIOS:

Under Power:

Wake up on PME/LAN 2 [ Disabled ]

Under Boot:

USB-Boot [ Enabled ]

Under Boot / Legacy Boot Type Order the following boot priority sequence:

1: USB ODD

2: SATA0 HDD

3: ...

Under Advanced / CPU-configuration:

CMP-Support (= Core Multi Processing)

[ Auto ] for D1/D2/D4 placement machines with 70x station software if they are not

equipped with an MC any more (both CAN and Hotlink interfaces are in the

same PC)

[ Disabled ] for D1/D2/D4 placement machines with an MC (no CAN interface in the

BoxPC) and for X-series placement machines with 60x station software.

► Perform the following items unter Exit successively:

► Confirm Save User Profile with [Yes].

► Confirm Load User Profile with [Yes].

► Exit BIOS with Exit / Exit saving changes / Yes.

4.2.4 BIOS Settings for I-Base PC with 60x Station Software Version

All required settings have been set by default (factory settings).

Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition

4.3 Installing the Windows XP Embedded Operating System

NOTICE

Before you start work, ensure that the DVD drive is set as the first boot device in the

BIOS to allow the computer to be booted from CD/DVD.

► If necessary, back up the machine data manually.

If you install Windows XP Embedded on a Vision computer in two-computer operation, the

following steps have to be performed:

► Disconnect the keyboard from the machine computer and connect it to the Vision computer.

► Switch the video multiplexer to the Vision computer.

► Unplug the USB cable for the DVD drive from the machine computer and plug it into the Vision

computer.

4.3.1 Installing the Installation CD/DVD

► Insert the suitable installation CD/DVD into the DVD drive.

WARNING

After the I-Base ABP102-A Restore CD has been started, the Restore Image will be

installed on the hard disk without any further queries. All data get lost and the

installation cannot be canceled!

► Switch on the computer to start it from the CD/DVD or reboot the computer, if it was already

switched on.

► Press any key, when the message "Press any key to boot from CD Rom" is displayed.

► Follow the instructions of the Restore Installation procedure (screen in text mode).

An automatic inspection of the system is carried out and then the screen for selecting the language

appears (not applicable for the I-Base PC):

1. Deutsch

2. English

► Select the required language.

Selection of Restore options:

1. Restore system partition only (partition C will be overridden, D remains unchanged) or

Restore existing system partition only (computer type "C")

2. Restore entire target drive (always select this option for initial installation) or

Restore complete system disk (computer type "C")

3. Cancel / Exit

► Select an option and confirm your selection.