00196737-07_IM_eWinXP_DE_EN.pdf - 第15页

W indows XP Em bedded / I nstallat ion Ma nual Ausgabe 06/2013 Ed ition 15 4.3 Installing t he Window s XP E mbedded O pera ting S ystem NOTICE Before you start work , ensure that the DVD drive is set as the f irst boot …

Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition

4.2.3 BIOS Settings for 627C / 827C BoxPCs with 60x and 70x Station Software

Versions

► Set the following values in BIOS:

Under Power:

Wake up on PME/LAN 2 [ Disabled ]

Under Boot:

USB-Boot [ Enabled ]

Under Boot / Legacy Boot Type Order the following boot priority sequence:

1: USB ODD

2: SATA0 HDD

3: ...

Under Advanced / CPU-configuration:

CMP-Support (= Core Multi Processing)

[ Auto ] for D1/D2/D4 placement machines with 70x station software if they are not

equipped with an MC any more (both CAN and Hotlink interfaces are in the

same PC)

[ Disabled ] for D1/D2/D4 placement machines with an MC (no CAN interface in the

BoxPC) and for X-series placement machines with 60x station software.

► Perform the following items unter Exit successively:

► Confirm Save User Profile with [Yes].

► Confirm Load User Profile with [Yes].

► Exit BIOS with Exit / Exit saving changes / Yes.

4.2.4 BIOS Settings for I-Base PC with 60x Station Software Version

All required settings have been set by default (factory settings).

Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition

4.3 Installing the Windows XP Embedded Operating System

NOTICE

Before you start work, ensure that the DVD drive is set as the first boot device in the

BIOS to allow the computer to be booted from CD/DVD.

► If necessary, back up the machine data manually.

If you install Windows XP Embedded on a Vision computer in two-computer operation, the

following steps have to be performed:

► Disconnect the keyboard from the machine computer and connect it to the Vision computer.

► Switch the video multiplexer to the Vision computer.

► Unplug the USB cable for the DVD drive from the machine computer and plug it into the Vision

computer.

4.3.1 Installing the Installation CD/DVD

► Insert the suitable installation CD/DVD into the DVD drive.

WARNING

After the I-Base ABP102-A Restore CD has been started, the Restore Image will be

installed on the hard disk without any further queries. All data get lost and the

installation cannot be canceled!

► Switch on the computer to start it from the CD/DVD or reboot the computer, if it was already

switched on.

► Press any key, when the message "Press any key to boot from CD Rom" is displayed.

► Follow the instructions of the Restore Installation procedure (screen in text mode).

An automatic inspection of the system is carried out and then the screen for selecting the language

appears (not applicable for the I-Base PC):

1. Deutsch

2. English

► Select the required language.

Selection of Restore options:

1. Restore system partition only (partition C will be overridden, D remains unchanged) or

Restore existing system partition only (computer type "C")

2. Restore entire target drive (always select this option for initial installation) or

Restore complete system disk (computer type "C")

3. Cancel / Exit

► Select an option and confirm your selection.

Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition

The operating system is installed and the computer is automatically rebooted.

After a short time, the message Restore completed is displayed and you are prompted to

remove the data medium and restart the computer (or after having pressed the Exit button).

► Remove the CD/DVD from the DVD drive and press any key (or the OK button).

The computer starts and the Windows login window is displayed (the first reboot may take some

minutes).

► Insert the "SIPLACE XP embedded Configurator" software CD into the DVD drive.

► Log on as Administrator without entering a password.

4.3.2 Choosing the Computer Configuration

After the reboot dialogs are displayed for hardware that has not been installed, e.g.:

Figure 4-1: Not installed hardware

► Shut all windows with Cancel or OK.

► Open Windows Explorer (e.g. via "My Computer" on the desktop) and navigate to the DVD

drive.

► Double-click on the XPeConfigurator.hta file from the software CD to start the "SIPLACE XP

embedded Configurator".